Advertise with us! Sign In

Listings in Information & Signal Processing, Operating Environments, Armour systems, Explosive Detection Sensors, Project Management and Control, Autonomous Robots and Media

Showing 12 of 31 results
Categories
Media 6
Defense Technologies 65
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Manufacturing Processing / Design Tools 20
Project Management and Control 5
Advanced Prototyping 8
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Techniques and Systems for Production Manufact. 5
Sensor Systems 9
Explosive Detection Sensors 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Communications & CIS 11
Air Traffic Control Systems 2
Command & Information Systems Integration 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Integrated Systems 14
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Systems Engineering and Integrated Systems Design 6
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 7
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Transmissions and Powertrains 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 49
Information & Signal Processing 13
Data & Information Management Technology 4
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Operating Environments 1
Acoustic Propagation in Air & Water 1
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Computing Technology 8
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 1
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 9
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Device Integration & Reliability 1
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Mechanical, Thermal and Fluid-Related Technologies 8
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Thermal and Thermodynamic Technologies and Devices 4
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 23
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Industry 4.0 16
Autonomous Robots 1
3D Printing 4
Augmented Reality 1
Big Data and Analytics 4
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Aviation (ATA 100 Chapters) 45
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor Drive(S) 2
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Defense Products 55
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Maintenance & Repair 13
Manufacturer 109
Service Provider 37
Space 14
Supplier 27
Unmanned Vehicles & Platforms 22
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
Locations
France 2
Germany 3
Hungary 1
Budapest 1
India 4
Gujarat 1
Punjab 1
Lithuania 1
Spain 1
Thailand 1
Turkey 8
Ankara 1
Istanbul 3
United Arab Emirates 3
United Kingdom 3
United States 5
Alabama 1
Massachusetts 1
Oklahoma 1
Pennsylvania 1
South Dakota 1
Virginia 1
Washington 1
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review Is this your listing?
Advance Die-Casting Industry Co., Ltd. Is this your listing?
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
Döksan Heat Treatment Jsc.
+905324316299
Write a review
Döksan Heat Treatment Jsc.
in Metals and Metal Matrix Composite Medical Products and Materials Project Management and Control Process Control Technology Procurement & Contracting Processes
(+2)
Manufacturer AS 9100 QMS
DÖKSAN ISIL İŞLEM, Uygurlar Caddesi, Sincan Osb Sincan, Ankara, Turkey
Our company, which carries out all heat treatment operations under one roof.
+905324316299
Processware Systems Private Limited
+91 80 2657-9635
Write a review
Processware Systems Private Limited
in Software Engineering High Integrity & Safety Critical Computing Mathematical Modelling Development Software Verification and Accreditation Techniques Digital Signal Processing Technology
(+15)
Radar Signatures RF Sensors / Antennas - Active RF Sensors / Antennas -Passive IR Sensors - Active IR Sensors - Passive Weapon Guidance and Control systems Platform Guidance and Control systems Missiles - Anti Air Missiles - Anti Surface (Sea) Flight Controls Landing Gear Engine Engine Controls Service Provider AS 9100 QMS
#33, Patalamma Temple Street, Basavanagudi, Bangalore , Karnataka 560 004, India
Processware is a leading software firm based in Bangalore. Processware has more than 2 decades of experience in the design and development of embedded systems for aerospace, defense, and space.
+91 80 2657-9635
Polaris Sensor Technologies, Inc.
256-562-0087x7664
Write a review
Polaris Sensor Technologies, Inc.
in Mathematical Modelling Development Optical Designs IR Sensors - Active IR Sensors - Passive Explosive Detection Sensors
(+5)
Environmental Monitoring Systems Navigation systems Advanced Prototyping ISTAR (Intelligence, Surveillance, Target Acquisit Unmanned Vehicles & Platforms
200 Westside Sq, Ste 320, Alabama 35801-4875, United States
Founded in 2003, Polaris Sensor Technologies, Inc. is a leading electro-optic sensor company that specializes in enhancing thermal imagery with polarization.
256-562-0087x7664
Defence Global Publication
Write a review
Defence Global Publication
in Service Provider Media Events Organizer
44 Peter Street, Manchester M2 5GP, United Kingdom
Leading Worldwide Defence & Security Publication.
Yöntem Teknoloji ve Endüstri Ürünleri San. Tic. Ltd Şti.
+905327021292
Write a review
Yöntem Teknoloji ve Endüstri Ürünleri San. Tic. Ltd Şti.
in Modelling and Simulation Technology Skills Training Systems Tactical / Crew Training systems Virtual Reality Education and Training
ADİL MAH KEMERLER SK NO 6 KAT 2 SULTANBEYLİ İSTANBUL 34935, Turkey
YONTEM TEKNOLOJI is established in 1997 and active in Training Labs , Equipments , Sets and Simulator Manufacturing for Aviation, Maritime Training.
+905327021292
NATION SHIELD JOURNAL
+971 2 4077138
Write a review
NATION SHIELD JOURNAL
in Media
Umm Al Naar, United Arab Emirates
Established in 1971, Nation Shield is the official United Arab Emirates Armed Forces / Ministry of Defence publication.
+971 2 4077138
AIMEN Technology Centre
+34670412243
Write a review
AIMEN Technology Centre
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Joining Technology Surface Protection Technologies Life Extension of Structural Materials
(+15)
Corrosion and Wear Control Technology Structural Mechanics Lasers (All Types) Non-Laser Devices Transparent Materials Device Concepts & Fabrication Data & Information Management Technology Digital Signal Processing Technology Image/Pattern Processing Technology Speech & Natural Language Processing Technology Optimisation & Decision Support Technology Information and Data Fusion Technology IR Sensors - Active IR Sensors - Passive AS 9100 QMS
C/ Relva, 27A - Torneiros O Porriño, Pontevedra 36410, Spain
We are an Innovation and Technology Centre highly specialized in materials and in advanced manufacturing technologies, especially joining technologies and laser technologies applied to materials processing, robotics, and automation.
+34670412243
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
Jet Cut
+33471590882
Write a review
Jet Cut
in Metals and Metal Matrix Composite Ceramics, Ceramic Matrix Composite and Glass Structural Mechanics Armour systems Manufacturer
(+1)
AS 9100 QMS
Jet Cut - groupe Energie Métal ZI de Lavé, 43200 Yssingeaux, France
JET CUT has the widest range of waterjet cutting in Europe. We manage in real time your deported stock ensuring you an end-to-end traceability of your raw materials, scraps ans finished parts.
+33471590882
ASU BALTIJA
+370 37 760112
Write a review
ASU BALTIJA
in Armour systems Defensive Aids Suite systems Systems Engineering and Integrated Systems Design Helicopters Manufacturer
(+5)
Service Provider Distributor Aerial Systems Expert Maintenance Repair and Operations (MRO)
Islandijos rd. 217 - 9 Kaunas 49165, Lithuania
ASU Baltija is an aviation engineering company which offers complex service and goods intended for the customers exploiting aircrafts as well as for special Interior and National Defense forces.
+370 37 760112
Advanced Armour Engineering
+971559869752
Write a review
Advanced Armour Engineering
in Metals and Metal Matrix Composite Joining Technology Forming Armour systems Ballistic Designs
(+3)
Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Manufacturer
T5 - 25 Sharjah Airport International Freezone, Sharjah, United Arab Emirates
Advanced Armour Engineering is a medium-sized privately held company specializing in precision mechanical welding, precision cut, and cold-formed components.
+971559869752
1 2 3
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha