Advertise with us! Sign In

Listings in Standard Practices And Structures - General, Silicon-based Materials, Protocol Technology, Secure Computing Techniques, Image/Pattern Processing Technology, Modelling and Simulation Technology, Sensor Systems, Data Display and Controls, Media and Process Control Technology

Showing 12 of 33 results
Categories
Media 6
Aviation (ATA 100 Chapters) 45
Standard Practices And Structures - General 1
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor Drive(S) 2
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defense Technologies 65
Sensor Systems 9
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Manufacturing Processing / Design Tools 20
Process Control Technology 7
Advanced Prototyping 8
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Project Management and Control 5
Techniques and Systems for Production Manufact. 5
Communications & CIS 11
Air Traffic Control Systems 2
Command & Information Systems Integration 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Integrated Systems 14
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 7
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Transmissions and Powertrains 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 49
Computing Technology 8
Protocol Technology 1
Secure Computing Techniques 1
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic Materials 4
Silicon-based Materials 3
Insulating and Dielectric Materials 2
Magnetic Materials 1
Superconducting Materials 1
Information & Signal Processing 13
Image/Pattern Processing Technology 6
Modelling and Simulation Technology 3
Data & Information Management Technology 4
Digital Signal Processing Technology 4
Information and Data Fusion Technology 4
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Electronic & Electrical Device Technology 9
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Device Integration & Reliability 1
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Mechanical, Thermal and Fluid-Related Technologies 8
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 1
Acoustic Propagation in Air & Water 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 23
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Unmanned Vehicles & Platforms 22
Data Display and Controls 1
Command and Control Subsystem 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Defense Products 55
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Industry 4.0 16
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
Maintenance & Repair 13
Manufacturer 109
Service Provider 37
Space 14
Supplier 27
Locations
Australia 1
QLD 1
Canada 1
Czech Republic 1
France 1
Germany 1
Hungary 1
Budapest 1
India 6
Gujarat 2
Punjab 1
Ireland 1
Italy 1
Spain 1
Thailand 1
Turkey 9
Ankara 1
Istanbul 4
United Arab Emirates 1
United Kingdom 1
United States 9
Alabama 1
Florida 1
Georgia 1
Massachusetts 1
Michigan 1
Ohio 1
Oklahoma 1
Pennsylvania 1
South Dakota 1
Virginia 1
Washington 1
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review Is this your listing?
Advance Die-Casting Industry Co., Ltd. Is this your listing?
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
CTECH Information Technologies Inc.
+902162905286
Write a review
CTECH Information Technologies Inc.
in Software Engineering Protocol Technology Secure Computing Techniques Encryption/ Crypto Technology Mathematical Modelling Development
(+15)
Software Verification and Accreditation Techniques Data & Information Management Technology Digital Signal Processing Technology Optical Signal Processing Technology Image/Pattern Processing Technology Speech & Natural Language Processing Technology Communication Navigation Electrical - Electronic Panels Components Multisystem Integrated Modular Avionics Information Systems Electronic Warfare System Manufacturer Space
Teknopark İstanbul, TGB, Sanayi Mah. Teknopark Bulvarı, No:1, Blok:1 Kat:2 Kurtköy-Pendik, Istanbul 34912, Turkey
C Tech Information Technologies Inc. founded in 2005, operates in Defense, Aerospace, Satellite Technologies, Communication Systems, Cyber Security, Modeling and Simulation.
+902162905286
RCF Technologies Inc
19125371115
Write a review
RCF Technologies Inc
in Surface Protection Technologies Corrosion and Wear Control Technology Acoustic & Vibration Absorbing Materials Silicon-based Materials Insulating and Dielectric Materials
(+5)
Thermal and Thermodynamic Technologies and Devices Aerodynamic Designs Electrical / Electronic Designs Fire Protection Manufacturer
RCF Technologies, Inc. 320 Commerce Loop, Georgia 30474-5643, United States
RCF Technologies, founded in 1975, is a woman owned, Hubzone certified company, designing and manufacturing components for industries including aerospace, automotive, marine, defense and industrial.
19125371115
NATION SHIELD JOURNAL
+971 2 4077138
Write a review
NATION SHIELD JOURNAL
in Media
Umm Al Naar, United Arab Emirates
Established in 1971, Nation Shield is the official United Arab Emirates Armed Forces / Ministry of Defence publication.
+971 2 4077138
Mabayco
00902165990519
Write a review
Mabayco
in Silicon-based Materials Electrical and Electrochemical Signatures Oil Supplier Distributor
(+1)
Aerospace Materials
ZÜHTÜPAŞA MAH. BAĞDAT CAD. YOLAÇ IŞ MERKEZI NO: 32 D:308/309 TR34724 KADIKÖY, Istanbul 34724, Turkey
One stop shop solution for aerospace and defense chemicals.
00902165990519
MXTREALITY
+18446972333
Write a review
MXTREALITY
in Modelling and Simulation Technology Virtual Reality Manufacturing Process Simulation Manufacturer Service Provider
(+1)
Simulation
3200 1st Ave South, STE 300,, Washington 98134, United States
We offer a unique set of multi-sensory solutions that can work on nearly every device, with an almost unlimited number of peripheral plug-ins to offer experiences that work for everyone, every device, every ability, everywhere.
+18446972333
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
A.M.Designs Pvt. Ltd.
0091-79-29708170 Ext. 104
Write a review
A.M.Designs Pvt. Ltd.
in Surface Protection Technologies Manufacturing Process Simulation Lean Manufacturing Process Control Technology Knowledge-based Engineering
(+4)
Manufacturer AS 9100 QMS 3D Printing Space
Hariganga Society, Kathwada G.I.D.C Plot No. 24 Road, Odhav Rd, Ahmedabad, Gujarat 382430, India
A.M. Designs Pvt. Ltd. is an AS9100D and ISO9001:2015 certified company with a strong foundation in advanced manufacturing solutions for metallic components and assemblies for Aviation, Space, Defence, and Telecom industries.
0091-79-29708170 Ext. 104
Defensebridge
05322455776
Write a review
Defensebridge
in Manufacturer Service Provider Supplier Space Media
(+2)
Airport Equipments and Services Maintenance & Repair
Istanbul 34726, Turkey
Online Yellow Pages for Aeronautics, Space, Defense, and Industry 4.0
05322455776
Döksan Heat Treatment Jsc.
+905324316299
Write a review
Döksan Heat Treatment Jsc.
in Metals and Metal Matrix Composite Medical Products and Materials Project Management and Control Process Control Technology Procurement & Contracting Processes
(+2)
Manufacturer AS 9100 QMS
DÖKSAN ISIL İŞLEM, Uygurlar Caddesi, Sincan Osb Sincan, Ankara, Turkey
Our company, which carries out all heat treatment operations under one roof.
+905324316299
AIMEN Technology Centre
+34670412243
Write a review
AIMEN Technology Centre
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Joining Technology Surface Protection Technologies Life Extension of Structural Materials
(+15)
Corrosion and Wear Control Technology Structural Mechanics Lasers (All Types) Non-Laser Devices Transparent Materials Device Concepts & Fabrication Data & Information Management Technology Digital Signal Processing Technology Image/Pattern Processing Technology Speech & Natural Language Processing Technology Optimisation & Decision Support Technology Information and Data Fusion Technology IR Sensors - Active IR Sensors - Passive AS 9100 QMS
C/ Relva, 27A - Torneiros O Porriño, Pontevedra 36410, Spain
We are an Innovation and Technology Centre highly specialized in materials and in advanced manufacturing technologies, especially joining technologies and laser technologies applied to materials processing, robotics, and automation.
+34670412243
Processware Systems Private Limited
+91 80 2657-9635
Write a review
Processware Systems Private Limited
in Software Engineering High Integrity & Safety Critical Computing Mathematical Modelling Development Software Verification and Accreditation Techniques Digital Signal Processing Technology
(+15)
Radar Signatures RF Sensors / Antennas - Active RF Sensors / Antennas -Passive IR Sensors - Active IR Sensors - Passive Weapon Guidance and Control systems Platform Guidance and Control systems Missiles - Anti Air Missiles - Anti Surface (Sea) Flight Controls Landing Gear Engine Engine Controls Service Provider AS 9100 QMS
#33, Patalamma Temple Street, Basavanagudi, Bangalore , Karnataka 560 004, India
Processware is a leading software firm based in Bangalore. Processware has more than 2 decades of experience in the design and development of embedded systems for aerospace, defense, and space.
+91 80 2657-9635
1 2 3
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha