Advertise with us! Sign In

Listings in 3D Printing, Modelling and Simulation Technology, Explosive Detection Sensors, Motion Sensor systems, Concurrent Engineering and Reduced Design Cycle, Military Doctrine Analysis and Media

Showing 12 of 19 results
Categories
Media 6
Defense Products 55
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Defense Technologies 65
Manufacturing Processing / Design Tools 20
Concurrent Engineering and Reduced Design Cycle 3
Advanced Prototyping 8
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 5
Techniques and Systems for Production Manufact. 5
Sensor Systems 9
Explosive Detection Sensors 1
Motion Sensor systems 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Communications & CIS 11
Air Traffic Control Systems 2
Command & Information Systems Integration 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Integrated Systems 14
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 7
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Transmissions and Powertrains 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 49
Information & Signal Processing 13
Modelling and Simulation Technology 3
Data & Information Management Technology 4
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Computing Technology 8
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 1
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 9
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Device Integration & Reliability 1
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Mechanical, Thermal and Fluid-Related Technologies 8
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 1
Acoustic Propagation in Air & Water 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 23
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Industry 4.0 16
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Aviation (ATA 100 Chapters) 45
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor Drive(S) 2
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Maintenance & Repair 13
Manufacturer 109
Service Provider 37
Space 14
Supplier 27
Unmanned Vehicles & Platforms 22
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
Locations
Australia 1
Canada 1
Ontario 1
France 1
India 4
Gujarat 2
Punjab 1
Indonesia 1
Malaysia 1
Singapore 1
Turkey 5
United Arab Emirates 2
United Kingdom 1
United States 4
Alabama 1
Iowa 1
Pennsylvania 1
Washington 1
+90 3D Digital Factory
+90 850 502 90 90
Write a review
+90 3D Digital Factory
in Manufacturer Service Provider AS 9100 QMS 3D Printing
IMES Sanayi Sitesi, A Blok, 101. Sokak, No: 3 Yukarı Dudullu, , Istanbul 34775, Turkey
For more than 15 years, +90 3D Digital Factory offers 3D manufacturing solutions to rapid part needs of its customers.
+90 850 502 90 90
SYSNAV
+33 (0)2 78 77 03 46
Write a review Is this your listing?
SYSNAV Is this your listing?
in Inertial/Gravitational Devices Optimisation & Decision Support Technology Information and Data Fusion Technology Magnetic Sensors Motion Sensor systems
(+12)
Tactical / Crew Training systems Command & Staff Training Systems Safety systems Techniques and Systems for Production Manufact. T&E Facilities (Test and Evaluation Facilities) Equipped Men Digitization of the Battlespace Education and Training Expert Maintenance & Repair Navigation, Guidance I. Autonomous Surface Vehicles
72 rue Emile Loubet 27200, France
Solutions de navigation et de géolocalisation, basées sur la capture du mouvement. La technologie magnéto-inertielle brevetée fournit des données de positionnement 3D précises, pour localiser les personnes et les véhicules sans GPS ni infrastructure.
+33 (0)2 78 77 03 46
Flymedia Technology
09888484310
Write a review Is this your listing?
Flymedia Technology Is this your listing?
in Media
Plot no, 20, Vishal Nagar Ext, opposite Kashish Cafe, Vishal Nagar, Jawaddi Taksal, Ludhiana, Punjab, Punjab 141013, India
We provide the services like SEO, SMO, etc. to our clients for growing their business.
09888484310
Bangaree Infotech Solutions
+91-9646763103
Write a review
Bangaree Infotech Solutions
in Media
Street No-3, AAA Tower, Chandigarh Rd, Near Veer Palace, Ludhiana, Punjab 141014, India
Bangaree Infotech Solutions is India’s leading SEO Company in Ludhiana and provides the finest Digital Marketing services in Ludhiana.
+91-9646763103
TopCSSGallery
7778865391
Write a review
TopCSSGallery
in Media
A-408 Shilp Aaron, Opp. Armieda, Nr. Pakvan, Sindhu Bhavan Road, , Bodakdev, Ahmedabad, Gujarat 380054, India
TopCSSGallery is a unique Web Design Portfolio global platform for showcasing and awarding the top websites.
7778865391
Argyle Materials, Inc.
855 527 4953
Write a review Is this your listing?
Argyle Materials, Inc. Is this your listing?
in 3D Printing
920 West 10th Street, Iowa 50219, United States
Since 2009 a leading Materials Company focused on the Rapid Prototyping and Rapid Manufacturing Industries.
855 527 4953
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
NATION SHIELD JOURNAL
+971 2 4077138
Write a review
NATION SHIELD JOURNAL
in Media
Umm Al Naar, United Arab Emirates
Established in 1971, Nation Shield is the official United Arab Emirates Armed Forces / Ministry of Defence publication.
+971 2 4077138
Pulse Technologies
+12677330200
Write a review
Pulse Technologies
in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control
(+6)
Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer AS 9100 QMS
2000 AM Drive Quakertown, Pennsylvania 18951, United States
As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.
+12677330200
Defensebridge
05322455776
Write a review
Defensebridge
in Manufacturer Service Provider Supplier Space Media
(+2)
Airport Equipments and Services Maintenance & Repair
Istanbul 34726, Turkey
Online Yellow Pages for Aeronautics, Space, Defense, and Industry 4.0
05322455776
Masttech
+905356629060
Write a review
Masttech
in Metals and Metal Matrix Composite Ceramics, Ceramic Matrix Composite and Glass Joining Technology Structural Mechanics Forming
(+11)
Mathematical Modelling Development Software Verification and Accreditation Techniques Modelling and Simulation Technology Tactical / Crew Training systems Systems Engineering and Integrated Systems Design Fighting Land Vehicles Logistic, Command and Surveillance Land Vehicles Unmanned Land, Sea, Air Vehicles Manufacturer Service Provider Education and Training
ASO 1. Org. San. Böl. / Ahi Evran OSB Mah./ Nahçivan Cad. No: 8/2 Sincan / ANKARA, Turkey
Masttech was established in Ankara in 2019 as the latest Turkish-American joint venture company in the defense industry.
+905356629060
Advanced Armour Engineering
+971559869752
Write a review
Advanced Armour Engineering
in Metals and Metal Matrix Composite Joining Technology Forming Armour systems Ballistic Designs
(+3)
Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Manufacturer
T5 - 25 Sharjah Airport International Freezone, Sharjah, United Arab Emirates
Advanced Armour Engineering is a medium-sized privately held company specializing in precision mechanical welding, precision cut, and cold-formed components.
+971559869752
1 2
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha