Advertise with us! Sign In

Listings in Standard Practices And Structures - General, Joining Technology, Visible / UV Wave Sensors, Concurrent Engineering and Reduced Design Cycle, Big Data and Analytics and Media

Showing 12 of 18 results
Categories
Media 6
Aviation (ATA 100 Chapters) 45
Standard Practices And Structures - General 1
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor Drive(S) 2
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defense Technologies 65
Manufacturing Processing / Design Tools 20
Concurrent Engineering and Reduced Design Cycle 3
Advanced Prototyping 8
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 5
Techniques and Systems for Production Manufact. 5
Sensor Systems 9
Visible / UV Wave Sensors 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Communications & CIS 11
Air Traffic Control Systems 2
Command & Information Systems Integration 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Integrated Systems 14
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 7
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Transmissions and Powertrains 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 49
Structural Materials 23
Joining Technology 4
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Computing Technology 8
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 1
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 9
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Device Integration & Reliability 1
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Information & Signal Processing 13
Data & Information Management Technology 4
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 8
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 1
Acoustic Propagation in Air & Water 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Industry 4.0 16
Big Data and Analytics 4
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Defense Products 55
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Maintenance & Repair 13
Manufacturer 109
Service Provider 37
Space 14
Supplier 27
Unmanned Vehicles & Platforms 22
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
Locations
Australia 2
QLD 1
Germany 2
India 4
Gujarat 2
Punjab 1
South Korea 1
Spain 1
Turkey 3
United Arab Emirates 2
United Kingdom 1
United States 3
California 2
Pennsylvania 1
Protonautics Pty Ltd
+61400433710
Write a review
Protonautics Pty Ltd
in Standard Practices And Structures - General Manufacturer AS 9100 QMS Space
23 Westgate St, Wacol, QLD 4076, Australia
Protonautics is an AS9100:D certified manufacturer of components for Aerospace and Defence clients. Our certification scope include machined components, chemical surface treatments and assembly services.
+61400433710
Flymedia Technology
09888484310
Write a review Is this your listing?
Flymedia Technology Is this your listing?
in Media
Plot no, 20, Vishal Nagar Ext, opposite Kashish Cafe, Vishal Nagar, Jawaddi Taksal, Ludhiana, Punjab, Punjab 141013, India
We provide the services like SEO, SMO, etc. to our clients for growing their business.
09888484310
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
Hufschmied Zerspanungssysteme GmbH
0823496640
Write a review
Hufschmied Zerspanungssysteme GmbH
in Manufacturer Supplier Big Data and Analytics Aerospace Power Plants and Related Equipments Aircraft Construction, Assembly and Sub-assembly
(+1)
Production Equipment and Software
Edisonstr. 11d, Bobingen 86399, Germany
HUFSCHMIED is Europe's leading manufacturer of material-related milling tools. The focus is on the production of milling tools and drills for plastics, fiberglass materials, and carbon materials (GFRP and CFRP).
0823496640
Pulse Technologies
+12677330200
Write a review
Pulse Technologies
in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control
(+6)
Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer AS 9100 QMS
2000 AM Drive Quakertown, Pennsylvania 18951, United States
As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.
+12677330200
eInfochips Inc.
+1-408-496-1882
Write a review
eInfochips Inc.
in Electrical / Electronic Designs Navigation systems Display systems Systems Engineering and Integrated Systems Design Robotics and Automated systems in Operational Sys.
(+15)
Health Monitoring Systems Integrated System Testing and Evaluation Communications systems - Acoustic Unmanned Land, Sea, Air Vehicles Research & Technology Management Cabin Systems Big Data and Analytics Industrial Internet of Things (IIoT) Cybersecurity Augmented Reality Ground Systems Air Traffic Control Onboard Equipment Systems Production Equipment and Software Unmanned Vehicle Aircraft (UAV, Drone)
2025 Gateway Place, Suite #270, San Jose, California 95110, United States
eInfochips, an Arrow company, is the one-stop shop for product engineering needs, with services across Devices, Digital, Quality, and Silicon Engineering with over 500 products developed and 40M deployments in 140+ Countries.
+1-408-496-1882
Defence Global Publication
Write a review
Defence Global Publication
in Service Provider Media Events Organizer
44 Peter Street, Manchester M2 5GP, United Kingdom
Leading Worldwide Defence & Security Publication.
Kappa Optronics GMBH
+4955089740
Write a review
Kappa Optronics GMBH
in Device Concepts & Fabrication Device Integration & Reliability Software Engineering Architectures Encryption/ Crypto Technology
(+10)
OA Tools and Techniques Software Verification and Accreditation Techniques Digital Signal Processing Technology Optical Signal Processing Technology Image/Pattern Processing Technology Information and Data Fusion Technology IR Sensors - Passive Visible / UV Wave Sensors Manufacturer AS 9100 QMS
Kappa optronics GmbH, Kleines Feld, Gleichen D-37130, Germany
Cameras and Vision Systems for Anything that Drives or Flies! Kappa has over 40 years of experience with application-specific cameras and vision systems in rugged and certifiable design – in small and mid-sized series.
+4955089740
NATION SHIELD JOURNAL
+971 2 4077138
Write a review
NATION SHIELD JOURNAL
in Media
Umm Al Naar, United Arab Emirates
Established in 1971, Nation Shield is the official United Arab Emirates Armed Forces / Ministry of Defence publication.
+971 2 4077138
AIMEN Technology Centre
+34670412243
Write a review
AIMEN Technology Centre
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Joining Technology Surface Protection Technologies Life Extension of Structural Materials
(+15)
Corrosion and Wear Control Technology Structural Mechanics Lasers (All Types) Non-Laser Devices Transparent Materials Device Concepts & Fabrication Data & Information Management Technology Digital Signal Processing Technology Image/Pattern Processing Technology Speech & Natural Language Processing Technology Optimisation & Decision Support Technology Information and Data Fusion Technology IR Sensors - Active IR Sensors - Passive AS 9100 QMS
C/ Relva, 27A - Torneiros O Porriño, Pontevedra 36410, Spain
We are an Innovation and Technology Centre highly specialized in materials and in advanced manufacturing technologies, especially joining technologies and laser technologies applied to materials processing, robotics, and automation.
+34670412243
Bright Apps LLC
9254200133
Write a review Is this your listing?
Bright Apps LLC Is this your listing?
in Software Engineering Big Data and Analytics Industrial Internet of Things (IIoT) The Cloud Computing
712 Bancroft Road, California 94598, United States
Bright Apps is at the technology frontier, propelling advancements with AI and tailored software development. Offering robust solutions to enterprises and governments, responding to the modern digital landscape’s unique demands.
9254200133
Advanced Armour Engineering
+971559869752
Write a review
Advanced Armour Engineering
in Metals and Metal Matrix Composite Joining Technology Forming Armour systems Ballistic Designs
(+3)
Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Manufacturer
T5 - 25 Sharjah Airport International Freezone, Sharjah, United Arab Emirates
Advanced Armour Engineering is a medium-sized privately held company specializing in precision mechanical welding, precision cut, and cold-formed components.
+971559869752
1 2
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha