List with Us Sign In

Listings in Photonic/Optical Materials & Device, Project Management and Control, Directed Energy Weapons, Drone, Industrial Internet of Things (IIoT) and Magnetic Sensors

Showing 12 of 35 results
Categories
Defense Products 59
Platforms 36
Drone 13
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 6
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 3
Space Launchers 3
Surveillance and Navigation Satellites 5
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 16
Weapons 18
Directed Energy Weapons 5
Gun Systems - Hand Held 10
Gun Systems - Platform Mounted 11
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 6
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 2
T&E Facilities (Test and Evaluation Facilities) 1
Defense Technologies 75
Manufacturing Processing / Design Tools 21
Project Management and Control 6
Advanced Prototyping 9
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 5
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Techniques and Systems for Production Manufact. 6
Sensor Systems 9
Magnetic Sensors 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Communications & CIS 15
Air Traffic Control Systems 2
Command & Information Systems Integration 3
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Communications systems-micro-and millimetre wave 1
Infrastructure to Support Information Management 1
Network Management Systems 4
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 21
Acoustic Designs 2
Aerodynamic Designs 3
Ballistic Designs 7
Electrical / Electronic Designs 5
Hydrodynamic Designs 1
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 4
Thermal / Cryogenic Designs 2
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 7
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 4
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 5
Integrated Systems 17
Health Monitoring Systems 2
Integrated System Testing and Evaluation 4
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 5
System Repair Technologies 3
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 13
Armour systems 7
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 10
Electrical Propulsion - rotary & linear 3
Final Drive - Wheels and Tracks 1
Gas Turbines 5
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 4
Transmissions and Powertrains 3
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 56
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Chemical & Biological Materials 6
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 5
Computing Technology 10
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 2
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 2
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 12
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 3
Device Integration & Reliability 2
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 3
Other Electrical Power Sources & Devices 4
RF Power Sources & Devices 3
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 6
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 4
Information & Signal Processing 14
Data & Information Management Technology 5
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 10
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 7
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 2
Acoustic Propagation in Air & Water 1
Meteorology 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 24
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 7
Surface Protection Technologies 5
Industry 4.0 23
Industrial Internet of Things (IIoT) 8
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Cybersecurity 9
Simulation 3
The Cloud Computing 3
AS 9100 QMS 58
Academia / Cluster / Association 1
Aerospace 66
Aerospace Materials 20
Aerospace Power Plants and Related Equipments 7
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 9
Aircraft Engines 8
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 5
Maintenance Repair and Operations (MRO) 12
Onboard Equipment Systems 4
Production Equipment and Software 8
Unmanned Vehicle Aircraft (UAV, Drone) 20
Aviation (ATA 100 Chapters) 49
(Airborne) Auxiliary Power Unit (APU) 1
Accessory Gear Box (Engine Driven) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 4
Communication 7
Electrical - Electronic Panels Components 5
Electrical Power 4
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 3
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 4
Lights 1
Main Rotor Drive(S) 3
Main Rotor(S) 4
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 3
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Wings 1
Defence 22
Aerial Systems 11
Ammunition Technology 7
Ground Systems 14
Naval Systems 8
Distributor 27
Education and Training 20
Events Organizer 1
Expert 10
Maintenance & Repair 14
Manufacturer 126
Media 32
Service Provider 144
Legal 93
Service Providers 12
Space 17
Supplier 34
Unmanned Vehicles & Platforms 26
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 2
I. Unmanned Aerial Systems 1
I. Unmanned Aerial Vehicles 2
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Mission Computer, Processing 1
Navigation, Guidance 3
Propulsion 2
Transport Vehicles 2
Vehicle Command and Control 2
Locations
Australia 1
Bulgaria 1
Canada 2
France 1
India 5
Gujarat 1
Maharashtra 1
Ireland 1
Israel 1
Latvia 1
Norway 1
Poland 1
Singapore 1
Spain 1
Taiwan 1
Thailand 1
Turkey 6
Ankara 2
Istanbul 1
United Arab Emirates 1
United Kingdom 1
United States 12
California 2
Florida 1
Nevada 1
New York 1
North Carolina 1
Pennsylvania 3
South Dakota 1
Virginia 1
Wisconsin 1
Döksan Heat Treatment Jsc.
+905324316299
Write a review
Döksan Heat Treatment Jsc.
in Metals and Metal Matrix Composite Medical Products and Materials Project Management and Control Process Control Technology Procurement & Contracting Processes
(+2)
Manufacturer AS 9100 QMS
DÖKSAN ISIL İŞLEM, Uygurlar Caddesi, Sincan Osb Sincan, Ankara, Turkey
Our company, which carries out all heat treatment operations under one roof.
+905324316299
Pulse Technologies
+12677330200
Write a review
Pulse Technologies
in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control
(+6)
Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer AS 9100 QMS
2000 AM Drive Quakertown, Pennsylvania 18951, United States
As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.
+12677330200
FIXAR-AERO LLC
+37126443023
Write a review
FIXAR-AERO LLC
in Drone Aircraft Construction, Assembly and Sub-assembly Production Equipment and Software Unmanned Vehicle Aircraft (UAV, Drone) Unmanned Vehicles & Platforms
Skandu street 7 LV-1067, Latvia
FIXAR is a leading software and aircraft developer, powering commercial autonomous UAVs for industrial applications.
+37126443023
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
Ravenscourt Engineering Limited
+441454316361
Write a review
Ravenscourt Engineering Limited
in Project Management and Control Lean Manufacturing Environmentally Friendly Factory Processes Knowledge-based Engineering Service Provider
(+1)
AS 9100 QMS
Millbrook Road, Yate, South Gloucestershire, BS37 5PB, United Kingdom
Ravenscourt Engineering Limited is a specialist Electron Beam Welding company, possessing AS9100 and NADCAP accreditations.
+441454316361
Custom Precision Solutions, Inc.
9198193805
Write a review
Custom Precision Solutions, Inc.
in Fighting Land Vehicles Combat Aircraft Helicopters Unmanned Land, Sea, Air Vehicles Communications Satellites
(+10)
Surveillance and Navigation Satellites Missiles - Anti Surface (Sea) Gun Systems - Platform Mounted Gun Systems - Hand Held Missiles - Anti Ground (Land) Commercial Aircraft Drone Manufacturer Supplier Aerospace Power Plants and Related Equipments
Raleigh-Durham International, North Carolina, United States
Custom-Engineered Mechanical, Electro-Mechanical & Fluidic Motion Control Devices, Established to provide the most advanced, custom-engineered, mechanical, electromechanical & fluidic motion control and position devices.
9198193805
Coskunoz Aerospace&Defence Inc.
00905311045948
Write a review
Coskunoz Aerospace&Defence Inc.
in Other Platform Protection Measures Combat Aircraft Helicopters Commercial Aircraft Drone
(+10)
Manufacturer AS 9100 QMS Ground Systems Naval Systems Aircraft Construction, Assembly and Sub-assembly Cabin and Seat Layouts Production Equipment and Software Aerospace Sensors Unmanned Vehicle Aircraft (UAV, Drone) Unmanned Vehicles & Platforms
75. YIL OSB MAH 19. CADDE NO:16, ESKISEHIR 26110, Turkey
We produce to the highest standards, fully aware of our responsibilities as a company working proudly under the umbrella of a holding, with a history going back 71 years. Today, we are among the leading integrated solution partners in the industry.
00905311045948
Universal Electronics Technology
+905326125100
Write a review
Universal Electronics Technology
in Optical Materials & Devices IR/Visible/UV Detector Materials & Devices Display Materials & Devices Image/Pattern Processing Technology Manufacturer
Çınar, Unıversal Elektronik, Teknoloji Ltd. Şti., Tahsin Bey Sokak, Maltepe, Istanbul, Turkey
We are a producer of high-end INFRARED ILLUMINATORS which are used as NIGHT VISION SUPPORT.
+905326125100
EFG Engineering
905056949852
Write a review
EFG Engineering
in Directed Energy Weapons AS 9100 QMS Aerial Systems Ground Systems Ammunition Technology
Ostim OSB Mah 100. Yıl Bulvarı No:99, İç Kapı No:5 Yenimahalle, Ankara 06374, Turkey
EFG Engineering started its activities in OSTİM in June 2021 to serve in the fields of Sheet Metal and Machining in the Defense and Aviation sector.
905056949852
Copterpix Ltd.
+972544646758
Write a review
Copterpix Ltd.
in Unmanned Land, Sea, Air Vehicles Drone Surveillance Manufacturer Service Provider
(+6)
Supplier Aerial Systems Expert Aircraft Construction, Assembly and Sub-assembly Unmanned Vehicle Aircraft (UAV, Drone) Unmanned Vehicles & Platforms
1 HaHarash St., Ashkelon, CopterPIX House 7878301, Israel
CopterPIX Israeli high-tech company specializes in design, develop & manufacture of autonomous BVLOS UAV applications and solutions. We introduce APS300 System Daas solution as well as our ERE95 series of Drones 30% more than ANY Drone in the world
+972544646758
AIMEN Technology Centre
+34670412243
Write a review
AIMEN Technology Centre
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Joining Technology Surface Protection Technologies Life Extension of Structural Materials
(+15)
Corrosion and Wear Control Technology Structural Mechanics Lasers (All Types) Non-Laser Devices Transparent Materials Device Concepts & Fabrication Data & Information Management Technology Digital Signal Processing Technology Image/Pattern Processing Technology Speech & Natural Language Processing Technology Optimisation & Decision Support Technology Information and Data Fusion Technology IR Sensors - Active IR Sensors - Passive AS 9100 QMS
C/ Relva, 27A - Torneiros O Porriño, Pontevedra 36410, Spain
We are an Innovation and Technology Centre highly specialized in materials and in advanced manufacturing technologies, especially joining technologies and laser technologies applied to materials processing, robotics, and automation.
+34670412243
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review
Advance Die-Casting Industry Co., Ltd.
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
1 2 3
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha

Download our app to your mobile phone

Available on the Apple Store
Sign In Register