List with Us Sign In

Listings in Forming, Thermal / Cryogenic Designs, Motion Sensor systems, Directed Energy Weapons, 3D Printing and Education and Training

Showing 12 of 40 results
Categories
Education and Training 20
Defense Products 59
Weapons 18
Directed Energy Weapons 5
Gun Systems - Hand Held 10
Gun Systems - Platform Mounted 11
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 6
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 2
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 36
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 6
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 3
Space Launchers 3
Surveillance and Navigation Satellites 5
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 16
Defense Technologies 75
Design Aspects - Platforms and Weapons 21
Thermal / Cryogenic Designs 2
Acoustic Designs 2
Aerodynamic Designs 3
Ballistic Designs 7
Electrical / Electronic Designs 5
Hydrodynamic Designs 1
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 4
Sensor Systems 9
Motion Sensor systems 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Communications & CIS 15
Air Traffic Control Systems 2
Command & Information Systems Integration 3
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Communications systems-micro-and millimetre wave 1
Infrastructure to Support Information Management 1
Network Management Systems 4
Optimisation, Planning & Decision Support systems 2
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 7
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 4
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 5
Integrated Systems 17
Health Monitoring Systems 2
Integrated System Testing and Evaluation 4
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 5
System Repair Technologies 3
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 13
Armour systems 7
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Manufacturing Processing / Design Tools 21
Advanced Prototyping 9
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 5
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 6
Techniques and Systems for Production Manufact. 6
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 10
Electrical Propulsion - rotary & linear 3
Final Drive - Wheels and Tracks 1
Gas Turbines 5
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 4
Transmissions and Powertrains 3
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 56
Structural Materials 24
Forming 10
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 7
Surface Protection Technologies 5
Chemical & Biological Materials 6
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 5
Computing Technology 10
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 2
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 2
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 12
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 3
Device Integration & Reliability 2
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 3
Other Electrical Power Sources & Devices 4
RF Power Sources & Devices 3
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 6
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 4
Information & Signal Processing 14
Data & Information Management Technology 5
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 10
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 7
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 2
Acoustic Propagation in Air & Water 1
Meteorology 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Industry 4.0 23
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Cybersecurity 9
Industrial Internet of Things (IIoT) 8
Simulation 3
The Cloud Computing 3
AS 9100 QMS 58
Academia / Cluster / Association 1
Aerospace 66
Aerospace Materials 20
Aerospace Power Plants and Related Equipments 7
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 9
Aircraft Engines 8
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 5
Maintenance Repair and Operations (MRO) 12
Onboard Equipment Systems 4
Production Equipment and Software 8
Unmanned Vehicle Aircraft (UAV, Drone) 20
Aviation (ATA 100 Chapters) 49
(Airborne) Auxiliary Power Unit (APU) 1
Accessory Gear Box (Engine Driven) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 4
Communication 7
Electrical - Electronic Panels Components 5
Electrical Power 4
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 3
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 4
Lights 1
Main Rotor Drive(S) 3
Main Rotor(S) 4
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 3
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Wings 1
Defence 22
Aerial Systems 11
Ammunition Technology 7
Ground Systems 14
Naval Systems 8
Distributor 27
Events Organizer 1
Expert 10
Maintenance & Repair 14
Manufacturer 126
Media 32
Service Provider 144
Legal 93
Service Providers 12
Space 17
Supplier 34
Unmanned Vehicles & Platforms 26
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 2
I. Unmanned Aerial Systems 1
I. Unmanned Aerial Vehicles 2
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Mission Computer, Processing 1
Navigation, Guidance 3
Propulsion 2
Transport Vehicles 2
Vehicle Command and Control 2
Locations
Australia 2
Victoria 1
Austria 1
Bulgaria 1
Canada 2
Ontario 1
France 2
Germany 2
Hong Kong 1
India 6
Gujarat 2
Maharashtra 1
Indonesia 1
Malaysia 1
Mexico 1
Pakistan 1
Portugal 1
Singapore 3
South Korea 1
Spain 2
Switzerland 1
Thailand 1
Turkey 8
Ankara 1
Istanbul 1
United Arab Emirates 1
United Kingdom 1
United States 6
Delaware 1
Iowa 1
Nebraska 1
New York 2
Pennsylvania 1
Menatek Defense Technologies
+90 850 800 66 85
Write a review
Menatek Defense Technologies
in Mechanical / Hydraulic Technologies and Devices Lubrication Technology Thermal and Thermodynamic Technologies and Devices Battle Damage Reduction Techniques Armour systems
(+14)
Structural Designs Mechanical Designs Ballistic Designs Acoustic Designs System Repair Technologies Integrated System Testing and Evaluation Manufacturing Process Simulation Lean Manufacturing Process Control Technology Whole Life Cycle Improvement Manufacturer AS 9100 QMS Education and Training Maintenance & Repair
Esenşehir, Esenşehir Mah. Bostancı Yolu Cad, Haseki Sokağı No:22, Dudullu Osb/Ümraniye, Istanbul 34776, Turkey
Menatek is the leading high-tech manufacturer and the largest supply chain manager of Türkiye and the MENA Region on heavy to light military vehicles, all types of tactical & combat platforms and its wide range of strategic suppliers.
+90 850 800 66 85
TBT Inc.
+82325521941
Write a review
TBT Inc.
in Thermal and Thermodynamic Technologies and Devices Thermal / Cryogenic Designs Logistic, Command and Surveillance Land Vehicles Logistic, Support and Surveillance Aircraft Surveillance and Navigation Satellites
(+3)
ISTAR (Intelligence, Surveillance, Target Acquisit Surveillance Manufacturer
10, Seounsandan-ro 4-gil, Gyeyang-gu, Incheon 21072, South Korea
TBT is one of the leading thermal imaging camera makers in Korea. We were established as a normal CCTV company in 2002 and have turned to the thermal market since 2009.
+82325521941
AEROTF
+34916388377
Write a review
AEROTF
in Metals and Metal Matrix Composite Forming Materials Removal Distributor Aerospace Materials
P.I. Ventorro del Cano Villaconejos, 16 Alcorcón, Madrid 28925, Spain
With over 20 years of experience in the aeronautical market, AeroTF is a specialist in the distribution of components and tools for both commercial and military aircraft and helicopters, and the space sector.
+34916388377
Qualitas Consultancy, Training and Certification Services
+90 536 926 7540
Write a review
Qualitas Consultancy, Training and Certification Services
in AS 9100 QMS Education and Training Service Providers
Feneryolu, Fahrettin Kerim Gökay Cd. No:124 D:16, Turkey
Providing service to the leading companies in their sectors since 2018, Qualitas aims to make positive changes in the corporate culture of its customers. Qualitas Plans, Does, Checks and Acts.
+90 536 926 7540
+90 3D Digital Factory
+90 850 502 90 90
Write a review
+90 3D Digital Factory
in Manufacturer Service Provider AS 9100 QMS 3D Printing
IMES Sanayi Sitesi, A Blok, 101. Sokak, No: 3 Yukarı Dudullu, , Istanbul 34775, Turkey
For more than 15 years, +90 3D Digital Factory offers 3D manufacturing solutions to rapid part needs of its customers.
+90 850 502 90 90
MAK SAVUNMA SANAYI LTD STI
+9 0 312 256 1606
Write a review
MAK SAVUNMA SANAYI LTD STI
in Metals and Metal Matrix Composite Structural Mechanics Forming RF Power Sources & Devices Other Electrical Power Sources & Devices
(+9)
Electric Motors Mechanical / Hydraulic Technologies and Devices Final Drive - Wheels and Tracks Mechanical Designs Fighting Land Vehicles Gun Systems - Platform Mounted Gun Systems - Hand Held Manufacturer Distributor
Yenibatı Mahallesi 2401 Sokak No:8 Batıkent, Yenimahalle / Ankara / 06370, Turkey
Manufacture of mechanical, electromechanical, and electrical spare parts for the aerospace and defense industries for military and civilian purposes.
+9 0 312 256 1606
EFG Engineering
905056949852
Write a review
EFG Engineering
in Directed Energy Weapons AS 9100 QMS Aerial Systems Ground Systems Ammunition Technology
Ostim OSB Mah 100. Yıl Bulvarı No:99, İç Kapı No:5 Yenimahalle, Ankara 06374, Turkey
EFG Engineering started its activities in OSTİM in June 2021 to serve in the fields of Sheet Metal and Machining in the Defense and Aviation sector.
905056949852
RICARDO & BARBOSA, LDA.
+351926816160
Write a review
RICARDO & BARBOSA, LDA.
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Forming Other Satellites Manufacturer
(+1)
AS 9100 QMS
Zona Industrial das Mimosas 4510-330, Portugal
Established in 1978, Ricardo & Barbosa is one of the largest portuguese references in the manufacture of high precision tools for Automotive, Electronics, Energy, Oil&Gas and Aeronautics industries.
+351926816160
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review
Advance Die-Casting Industry Co., Ltd.
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
Yöntem Teknoloji ve Endüstri Ürünleri San. Tic. Ltd Şti.
+905327021292
Write a review
Yöntem Teknoloji ve Endüstri Ürünleri San. Tic. Ltd Şti.
in Modelling and Simulation Technology Skills Training Systems Tactical / Crew Training systems Virtual Reality Education and Training
ADİL MAH KEMERLER SK NO 6 KAT 2 SULTANBEYLİ İSTANBUL 34935, Turkey
YONTEM TEKNOLOJI is established in 1997 and active in Training Labs , Equipments , Sets and Simulator Manufacturing for Aviation, Maritime Training.
+905327021292
Masttech
+905356629060
Write a review
Masttech
in Metals and Metal Matrix Composite Ceramics, Ceramic Matrix Composite and Glass Joining Technology Structural Mechanics Forming
(+11)
Mathematical Modelling Development Software Verification and Accreditation Techniques Modelling and Simulation Technology Tactical / Crew Training systems Systems Engineering and Integrated Systems Design Fighting Land Vehicles Logistic, Command and Surveillance Land Vehicles Unmanned Land, Sea, Air Vehicles Manufacturer Service Provider Education and Training
ASO 1. Org. San. Böl. / Ahi Evran OSB Mah./ Nahçivan Cad. No: 8/2 Sincan / ANKARA, Turkey
Masttech was established in Ankara in 2019 as the latest Turkish-American joint venture company in the defense industry.
+905356629060
The European Club for Countertrade and Offset
+33783923466
Write a review
The European Club for Countertrade and Offset
in Service Provider Education and Training Expert
176 Avenue Charles de Gaulle, 92200 Neuilly-sur-Seine, Île-de-France, France
The European Club for Countertrade and Offset (ECCO) is an Association incorporated under French law and established in 2010. It aims to bring together parties involved in Offsets, Industrial Participation and/or countertrade activities.
+33783923466
1 2 3 4
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha

Download our app to your mobile phone

Available on the Apple Store
Sign In Register