Advertise with us! Sign In

Listings in Manufacturer, Secure Computing Techniques, Digital Signal Processing Technology, Modelling and Simulation Technology, Thermal and Thermodynamic Technologies and Devices, Explosive Detection Sensors, Reliability and Maintainability of Systems, Project Management and Control, Data Display and Controls and Media

Showing 12 of 121 results
Categories
Manufacturer 109
Media 6
Defense Technologies 65
Integrated Systems 14
Reliability and Maintainability of Systems 1
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Systems Engineering and Integrated Systems Design 6
Manufacturing Processing / Design Tools 20
Project Management and Control 5
Advanced Prototyping 8
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Techniques and Systems for Production Manufact. 5
Sensor Systems 9
Explosive Detection Sensors 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Communications & CIS 11
Air Traffic Control Systems 2
Command & Information Systems Integration 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 7
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Transmissions and Powertrains 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 49
Computing Technology 8
Secure Computing Techniques 1
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Information & Signal Processing 13
Digital Signal Processing Technology 4
Modelling and Simulation Technology 3
Data & Information Management Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 8
Thermal and Thermodynamic Technologies and Devices 4
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Electronic & Electrical Device Technology 9
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Device Integration & Reliability 1
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Operating Environments 1
Acoustic Propagation in Air & Water 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 23
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Unmanned Vehicles & Platforms 22
Data Display and Controls 1
Command and Control Subsystem 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Aviation (ATA 100 Chapters) 45
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor Drive(S) 2
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Defense Products 55
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Industry 4.0 16
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
Maintenance & Repair 13
Service Provider 37
Space 14
Supplier 27
Locations
Australia 2
QLD 1
Austria 1
Belgium 3
Bulgaria 2
Canada 3
Ontario 1
Czech Republic 2
France 4
Germany 6
Waischenfeld 1
India 20
Gujarat 4
Karnataka 2
Maharashtra 3
Punjab 1
Israel 1
Italy 2
Japan 1
Jordan 1
Latvia 1
Lithuania 1
Malaysia 1
Mexico 2
Netherlands 2
Pakistan 3
NIL 1
Sindh 1
Portugal 1
Romania 1
Serbia 1
Singapore 2
Singapore 1
Slovakia 1
Slovenia 1
South Africa 1
South Korea 2
Spain 3
Switzerland 1
Taiwan 1
Thailand 1
Turkey 21
Ankara 4
Istanbul 5
Ukraine 1
United Arab Emirates 4
United Kingdom 7
England 1
United States 33
Alabama 2
California 5
Florida 1
Georgia 1
Illinois 2
Massachusetts 1
Michigan 1
Minnesota 1
Missouri 1
New York 4
North Carolina 1
Ohio 3
Oklahoma 1
Pennsylvania 3
South Dakota 1
Texas 2
Utah 2
Virginia 1
Washington 2
BLADE BROTHERS KNIVES
+380951235510
Write a review Is this your listing?
BLADE BROTHERS KNIVES Is this your listing?
in Skills Training Systems Manufacturer
Blade Brothers Knives, Shevchenka Street, Kharkiv, Kharkivs'ka Oblast, Kharkiv, Defenders of Ukraine square, 7/8 61000, Ukraine
Blade Brothers Knives is a Ukrainian company specializing in designing and manufacturing high-quality knives. BB Knives creates versatile knives for use in extreme conditions, designed for the military, survivalists, and hunters.
+380951235510
Yöntem Teknoloji ve Endüstri Ürünleri San. Tic. Ltd Şti.
+905327021292
Write a review
Yöntem Teknoloji ve Endüstri Ürünleri San. Tic. Ltd Şti.
in Modelling and Simulation Technology Skills Training Systems Tactical / Crew Training systems Virtual Reality Education and Training
ADİL MAH KEMERLER SK NO 6 KAT 2 SULTANBEYLİ İSTANBUL 34935, Turkey
YONTEM TEKNOLOJI is established in 1997 and active in Training Labs , Equipments , Sets and Simulator Manufacturing for Aviation, Maritime Training.
+905327021292
BIJOL D.O.O.
+38640823083
Write a review
BIJOL D.O.O.
in Logistic, Command and Surveillance Land Vehicles Fire Protection Manufacturer Service Provider Distributor
Livarska cesta 17, 2367 Vuzenica 2367, Slovenia
We are a company with more than 20 years of tradition in representing and selling products of reputable global companies, and in recent years we have been adding more and more of our own products to our sales program.
+38640823083
Sandeep Metal Craft Pvt. Ltd
+919823037009
Write a review
Sandeep Metal Craft Pvt. Ltd
in Penetrators Mines - Land Missiles - Anti Air Missiles - Anti Surface (Sea) Gun Systems - Platform Mounted
(+13)
Gun Systems - Hand Held Directed Energy Weapons Non-Lethal Weapons Mines - Sea Missiles - Anti Ground (Land) Torpedoes - Anti Surface Torpedoes - Anti Submarine Product Supportability Business Process Simulation Benchmarking & Best Practice Manufacturer Ground Systems Ammunition Technology
D-16 M.I.D.C INDUSTRIAL AREA HINGNA, Maharashtra 440016, India
Established with an aim to offer the best, Sandeep Metalcraft Private Limited (SMPL) is one of the leading names in the field of Precision Manufacturing and Assembly.
+919823037009
OPTOKON, a.s.
+420564040111
Write a review
OPTOKON, a.s.
in ESM - Communications Communications & CIS Security systems Optimisation, Planning & Decision Support systems Military Intelligence Communication
(+1)
Manufacturer
OPTOKON, a.s., Červený Kříž, Jihlava, Czechia, Czech Republic
OPTOKON a.s. is a company with over 30 years of experience in the information and communications technology market.
+420564040111
NATION SHIELD JOURNAL
+971 2 4077138
Write a review
NATION SHIELD JOURNAL
in Media
Umm Al Naar, United Arab Emirates
Established in 1971, Nation Shield is the official United Arab Emirates Armed Forces / Ministry of Defence publication.
+971 2 4077138
Accurate Components Corp.
1-631-920-7707
Write a review
Accurate Components Corp.
in Manufacturer AS 9100 QMS
49 NANCY STREET WEST BABYLON, NY 11704-1433, New York 11704, United States
We manufacture the best Quality Fasteners and Precision Parts in the marketplace.
1-631-920-7707
Rhino Inc.
+90 312 503 6069
Write a review
Rhino Inc.
in Manufacturer
Ostim Osb Mahallesi 1234. Cadde No:15 Ostim, Ankara, Turkey
Rhino Inc. provides design, development, and manufacturing services of electronic type parts and connectors, requiring machining.
+90 312 503 6069
Precision Automation & Robotics India Limited (PARI)
+919822604834
Write a review
Precision Automation & Robotics India Limited (PARI)
in Transmissions and Powertrains Robotics and Automated systems in Operational Sys. Process Control Technology Manufacturer Industrial Internet of Things (IIoT)
Precision Automation & Robotics India, Vishnupuram Colony, Katraj, Pune, Maharashtra, India
Precision Automation & Robotics India Limited (PARI), headquartered in Pune, India was founded in 1990 by Mangesh Kale and Ranjit Date who had the knowledge and experience to understand the manufacturing industry’s needs.
+919822604834
SDi TOOLS : Your Cutting Edge
Write a review
SDi TOOLS : Your Cutting Edge
in Manufacturer Service Provider Supplier
F-56, MIDC, Ambad, Maharashtra 422010, India
Manufacturers of Special Cutting Tools for Machining of Aerospace Materials.
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review Is this your listing?
Advance Die-Casting Industry Co., Ltd. Is this your listing?
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
Kappa Optronics GMBH
+4955089740
Write a review
Kappa Optronics GMBH
in Device Concepts & Fabrication Device Integration & Reliability Software Engineering Architectures Encryption/ Crypto Technology
(+10)
OA Tools and Techniques Software Verification and Accreditation Techniques Digital Signal Processing Technology Optical Signal Processing Technology Image/Pattern Processing Technology Information and Data Fusion Technology IR Sensors - Passive Visible / UV Wave Sensors Manufacturer AS 9100 QMS
Kappa optronics GmbH, Kleines Feld, Gleichen D-37130, Germany
Cameras and Vision Systems for Anything that Drives or Flies! Kappa has over 40 years of experience with application-specific cameras and vision systems in rugged and certifiable design – in small and mid-sized series.
+4955089740
1 2 3 4 5 …
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha