Advertise with us! Sign In

Listings in Main Rotor Drive(S), Device Integration & Reliability, Armour systems, Explosive Detection Sensors, Systems Engineering and Integrated Systems Design, Concurrent Engineering and Reduced Design Cycle, Big Data and Analytics and Media

Showing 12 of 26 results
Categories
Media 6
Aviation (ATA 100 Chapters) 45
Main Rotor Drive(S) 2
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defense Technologies 65
Integrated Systems 14
Systems Engineering and Integrated Systems Design 6
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Manufacturing Processing / Design Tools 20
Concurrent Engineering and Reduced Design Cycle 3
Advanced Prototyping 8
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 5
Techniques and Systems for Production Manufact. 5
Sensor Systems 9
Explosive Detection Sensors 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Communications & CIS 11
Air Traffic Control Systems 2
Command & Information Systems Integration 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 7
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Transmissions and Powertrains 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 49
Electronic & Electrical Device Technology 9
Device Integration & Reliability 1
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Computing Technology 8
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 1
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Information & Signal Processing 13
Data & Information Management Technology 4
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 8
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 1
Acoustic Propagation in Air & Water 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 23
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Industry 4.0 16
Big Data and Analytics 4
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Defense Products 55
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Maintenance & Repair 13
Manufacturer 109
Service Provider 37
Space 14
Supplier 27
Unmanned Vehicles & Platforms 22
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
Locations
Australia 1
Canada 1
Czech Republic 1
France 1
Germany 2
India 5
Gujarat 2
Punjab 1
Ireland 1
Lithuania 1
Pakistan 1
NIL 1
Turkey 4
Istanbul 1
United Arab Emirates 3
United Kingdom 2
United States 5
Alabama 1
California 2
Pennsylvania 1
Utah 1
BEMSCO INC.
+18014877455
Write a review
BEMSCO INC.
in Warheads Penetrators Gun and Launch Tube Propulsion Advanced Prototyping Techniques and Systems for Production Manufact.
(+10)
Lean Manufacturing Landing Gear Nacelles/Pylons Stabilizers Main Rotor(S) Main Rotor Drive(S) Tail Rotor Tail Rotor Drive Manufacturer AS 9100 QMS
Bemsco Inc, 400 West, Salt Lake City, Utah 84101, United States
Bemsco is a privately held small business that has been manufacturing products for the DOD and commercial sources for over 50 years.
+18014877455
Defence Global Publication
Write a review
Defence Global Publication
in Service Provider Media Events Organizer
44 Peter Street, Manchester M2 5GP, United Kingdom
Leading Worldwide Defence & Security Publication.
TopCSSGallery
7778865391
Write a review
TopCSSGallery
in Media
A-408 Shilp Aaron, Opp. Armieda, Nr. Pakvan, Sindhu Bhavan Road, , Bodakdev, Ahmedabad, Gujarat 380054, India
TopCSSGallery is a unique Web Design Portfolio global platform for showcasing and awarding the top websites.
7778865391
Pulse Technologies
+12677330200
Write a review
Pulse Technologies
in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control
(+6)
Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer AS 9100 QMS
2000 AM Drive Quakertown, Pennsylvania 18951, United States
As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.
+12677330200
Masttech
+905356629060
Write a review
Masttech
in Metals and Metal Matrix Composite Ceramics, Ceramic Matrix Composite and Glass Joining Technology Structural Mechanics Forming
(+11)
Mathematical Modelling Development Software Verification and Accreditation Techniques Modelling and Simulation Technology Tactical / Crew Training systems Systems Engineering and Integrated Systems Design Fighting Land Vehicles Logistic, Command and Surveillance Land Vehicles Unmanned Land, Sea, Air Vehicles Manufacturer Service Provider Education and Training
ASO 1. Org. San. Böl. / Ahi Evran OSB Mah./ Nahçivan Cad. No: 8/2 Sincan / ANKARA, Turkey
Masttech was established in Ankara in 2019 as the latest Turkish-American joint venture company in the defense industry.
+905356629060
Infiniti Electro Optics - Long Range EO/IR Surveillance
1-866-969-6463
Write a review
Infiniti Electro Optics - Long Range EO/IR Surveillance
in DET - RF DET -Lasers DET - Other EOCM - IR / Visible / UV EOPM - IR / Visible / UV
(+8)
IR Sensors - Active IR Sensors - Passive Systems Engineering and Integrated Systems Design Communications systems - IR / Visible / UV Missiles - Anti Air Gun Systems - Platform Mounted Directed Energy Weapons Manufacturer
15 9th Avenue South Cranbrook, BC V1C 2L9, Canada
Infiniti combines the most advanced electro-optics and video surveillance technologies into customized products that meet our client’s specific requirements.
1-866-969-6463
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
Hufschmied Zerspanungssysteme GmbH
0823496640
Write a review
Hufschmied Zerspanungssysteme GmbH
in Manufacturer Supplier Big Data and Analytics Aerospace Power Plants and Related Equipments Aircraft Construction, Assembly and Sub-assembly
(+1)
Production Equipment and Software
Edisonstr. 11d, Bobingen 86399, Germany
HUFSCHMIED is Europe's leading manufacturer of material-related milling tools. The focus is on the production of milling tools and drills for plastics, fiberglass materials, and carbon materials (GFRP and CFRP).
0823496640
Elektro Control Industries (Pvt) Ltd.
+923335156614
Write a review Is this your listing?
Elektro Control Industries (Pvt) Ltd. Is this your listing?
in Systems Engineering and Integrated Systems Design Safety systems Product Supportability Research & Technology Management Communication
(+8)
Pneumatic Electrical - Electronic Panels Components Integrated Modular Avionics Onboard Maintenance Systems Inert Gas System Weapon System Manufacturer Maintenance Repair and Operations (MRO)
PLOT #8, SERVICE ROAD EAST, SECTOR I-11/4, ISLAMABAD, NIL 44000, Pakistan
ECI Islamabad, is an engineering products development company and supporting Industrial, Defense & Commercial sectors in Pakistan & abroad from last 20 years. ECI provides design & development services to develop customized products to its customers.
+923335156614
Defensebridge
05322455776
Write a review
Defensebridge
in Manufacturer Service Provider Supplier Space Media
(+2)
Airport Equipments and Services Maintenance & Repair
Istanbul 34726, Turkey
Online Yellow Pages for Aeronautics, Space, Defense, and Industry 4.0
05322455776
Bright Apps LLC
9254200133
Write a review Is this your listing?
Bright Apps LLC Is this your listing?
in Software Engineering Big Data and Analytics Industrial Internet of Things (IIoT) The Cloud Computing
712 Bancroft Road, California 94598, United States
Bright Apps is at the technology frontier, propelling advancements with AI and tailored software development. Offering robust solutions to enterprises and governments, responding to the modern digital landscape’s unique demands.
9254200133
Advanced Armour Engineering
+971559869752
Write a review
Advanced Armour Engineering
in Metals and Metal Matrix Composite Joining Technology Forming Armour systems Ballistic Designs
(+3)
Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Manufacturer
T5 - 25 Sharjah Airport International Freezone, Sharjah, United Arab Emirates
Advanced Armour Engineering is a medium-sized privately held company specializing in precision mechanical welding, precision cut, and cold-formed components.
+971559869752
1 2 3
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha