Advertise with us! Sign In

Listings in Joining Technology, Superconducting Materials, Operating Environments, Transmissions and Powertrains, Motion Sensor systems, Project Management and Control, Data Display and Controls, Autonomous Robots and Media

Showing 12 of 22 results
Categories
Media 6
Defense Technologies 65
Manufacturing Processing / Design Tools 20
Project Management and Control 5
Advanced Prototyping 8
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Techniques and Systems for Production Manufact. 5
Propulsion and Powerplants 7
Transmissions and Powertrains 2
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Sensor Systems 9
Motion Sensor systems 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Communications & CIS 11
Air Traffic Control Systems 2
Command & Information Systems Integration 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Integrated Systems 14
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 49
Operating Environments 1
Acoustic Propagation in Air & Water 1
Electronic Materials 4
Superconducting Materials 1
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Structural Materials 23
Joining Technology 4
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Computing Technology 8
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 1
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 9
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Device Integration & Reliability 1
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Information & Signal Processing 13
Data & Information Management Technology 4
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 8
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Thermal and Thermodynamic Technologies and Devices 4
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Industry 4.0 16
Autonomous Robots 1
3D Printing 4
Augmented Reality 1
Big Data and Analytics 4
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
Unmanned Vehicles & Platforms 22
Data Display and Controls 1
Command and Control Subsystem 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Aviation (ATA 100 Chapters) 45
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor Drive(S) 2
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Defense Products 55
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Maintenance & Repair 13
Manufacturer 109
Service Provider 37
Space 14
Supplier 27
Locations
France 1
Germany 1
India 4
Gujarat 1
Punjab 1
Italy 2
South Korea 1
Spain 1
Thailand 1
Turkey 4
Ankara 1
United Arab Emirates 2
United Kingdom 2
United States 3
Michigan 1
Pennsylvania 1
South Dakota 1
Virginia 1
SOLIANI EMC SRL
+393356265588
Write a review
SOLIANI EMC SRL
in Metals and Metal Matrix Composite Surface Protection Technologies Acoustic & Vibration Absorbing Materials Radar Absorbing Materials & Coatings Silicon-based Materials
(+5)
Superconducting Materials Magnetic Materials Manufacturer AS 9100 QMS Aerospace Materials
Via Varesina 122, Como (CO) 22100, Italy
Electromagnetic custom shielding solution covering from magnetic to electric and plain weave to 40 GHz and qualifications with our instrument in our private laboratory, the SOLIANI EMC have a qualification EN 9100.
+393356265588
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review Is this your listing?
Advance Die-Casting Industry Co., Ltd. Is this your listing?
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
Döksan Heat Treatment Jsc.
+905324316299
Write a review
Döksan Heat Treatment Jsc.
in Metals and Metal Matrix Composite Medical Products and Materials Project Management and Control Process Control Technology Procurement & Contracting Processes
(+2)
Manufacturer AS 9100 QMS
DÖKSAN ISIL İŞLEM, Uygurlar Caddesi, Sincan Osb Sincan, Ankara, Turkey
Our company, which carries out all heat treatment operations under one roof.
+905324316299
Defence Global Publication
Write a review
Defence Global Publication
in Service Provider Media Events Organizer
44 Peter Street, Manchester M2 5GP, United Kingdom
Leading Worldwide Defence & Security Publication.
NATION SHIELD JOURNAL
+971 2 4077138
Write a review
NATION SHIELD JOURNAL
in Media
Umm Al Naar, United Arab Emirates
Established in 1971, Nation Shield is the official United Arab Emirates Armed Forces / Ministry of Defence publication.
+971 2 4077138
AIMEN Technology Centre
+34670412243
Write a review
AIMEN Technology Centre
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Joining Technology Surface Protection Technologies Life Extension of Structural Materials
(+15)
Corrosion and Wear Control Technology Structural Mechanics Lasers (All Types) Non-Laser Devices Transparent Materials Device Concepts & Fabrication Data & Information Management Technology Digital Signal Processing Technology Image/Pattern Processing Technology Speech & Natural Language Processing Technology Optimisation & Decision Support Technology Information and Data Fusion Technology IR Sensors - Active IR Sensors - Passive AS 9100 QMS
C/ Relva, 27A - Torneiros O Porriño, Pontevedra 36410, Spain
We are an Innovation and Technology Centre highly specialized in materials and in advanced manufacturing technologies, especially joining technologies and laser technologies applied to materials processing, robotics, and automation.
+34670412243
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
Advanced Armour Engineering
+971559869752
Write a review
Advanced Armour Engineering
in Metals and Metal Matrix Composite Joining Technology Forming Armour systems Ballistic Designs
(+3)
Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Manufacturer
T5 - 25 Sharjah Airport International Freezone, Sharjah, United Arab Emirates
Advanced Armour Engineering is a medium-sized privately held company specializing in precision mechanical welding, precision cut, and cold-formed components.
+971559869752
Masttech
+905356629060
Write a review
Masttech
in Metals and Metal Matrix Composite Ceramics, Ceramic Matrix Composite and Glass Joining Technology Structural Mechanics Forming
(+11)
Mathematical Modelling Development Software Verification and Accreditation Techniques Modelling and Simulation Technology Tactical / Crew Training systems Systems Engineering and Integrated Systems Design Fighting Land Vehicles Logistic, Command and Surveillance Land Vehicles Unmanned Land, Sea, Air Vehicles Manufacturer Service Provider Education and Training
ASO 1. Org. San. Böl. / Ahi Evran OSB Mah./ Nahçivan Cad. No: 8/2 Sincan / ANKARA, Turkey
Masttech was established in Ankara in 2019 as the latest Turkish-American joint venture company in the defense industry.
+905356629060
Flymedia Technology
09888484310
Write a review Is this your listing?
Flymedia Technology Is this your listing?
in Media
Plot no, 20, Vishal Nagar Ext, opposite Kashish Cafe, Vishal Nagar, Jawaddi Taksal, Ludhiana, Punjab, Punjab 141013, India
We provide the services like SEO, SMO, etc. to our clients for growing their business.
09888484310
New Eagle
1-734-929-4557
Write a review
New Eagle
in Electric Motors Unmanned Land, Sea, Air Vehicles Supplier Distributor Unmanned Vehicle Aircraft (UAV, Drone)
(+7)
Electrical Subsystem Data Display and Controls Command and Control Subsystem I. Unmanned Maritime System I. Unmanned Ground Vehicles I. Unmanned Maritime Vehicle Vehicle Command and Control
110 Parkland Plaza, Ann Arbor, Michigan 48103, United States
New Eagle specializes in mechatronic control systems — the electronic brains that drive mechanical systems.
1-734-929-4557
BEAMIT SPA
+390525401281
Write a review
BEAMIT SPA
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Gas Turbines Rocket Engines and Ramjets Transmissions and Powertrains
(+15)
Design for Improved Reliability & Maintainability Advanced Prototyping Techniques and Systems for Production Manufact. Environmentally Friendly Factory Processes Fighting Land Vehicles Combat Aircraft Helicopters Unmanned Land, Sea, Air Vehicles Lighter-than-Air Platforms Communications Satellites Manufacturer Service Provider AS 9100 QMS Space Aerospace Sensors
Strada Prinzera, 17 Fornovo di Taro (PR) 43045, Italy
BEAMIT Group is a European leading company in advanced manufacturing, that includes Additive Manufacturing and Post processes, as a unique organization with an integral internal value chain.
+390525401281
1 2
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha