List with Us Sign In

Listings in Modelling and Simulation Technology, Project Management and Control, Inert Gas System and Simulation

Showing 12 of 12 results
Categories
Aviation (ATA 100 Chapters) 49
Inert Gas System 1
(Airborne) Auxiliary Power Unit (APU) 1
Accessory Gear Box (Engine Driven) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 4
Communication 7
Electrical - Electronic Panels Components 5
Electrical Power 4
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 3
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 4
Lights 1
Main Rotor Drive(S) 3
Main Rotor(S) 4
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 3
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Wings 1
Defense Technologies 75
Manufacturing Processing / Design Tools 21
Project Management and Control 6
Advanced Prototyping 9
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 5
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Techniques and Systems for Production Manufact. 6
Communications & CIS 15
Air Traffic Control Systems 2
Command & Information Systems Integration 3
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Communications systems-micro-and millimetre wave 1
Infrastructure to Support Information Management 1
Network Management Systems 4
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 21
Acoustic Designs 2
Aerodynamic Designs 3
Ballistic Designs 7
Electrical / Electronic Designs 5
Hydrodynamic Designs 1
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 4
Thermal / Cryogenic Designs 2
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 7
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 4
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 5
Integrated Systems 17
Health Monitoring Systems 2
Integrated System Testing and Evaluation 4
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 5
System Repair Technologies 3
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 13
Armour systems 7
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 10
Electrical Propulsion - rotary & linear 3
Final Drive - Wheels and Tracks 1
Gas Turbines 5
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 4
Transmissions and Powertrains 3
Sensor Systems 9
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 56
Information & Signal Processing 14
Modelling and Simulation Technology 3
Data & Information Management Technology 5
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Chemical & Biological Materials 6
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 5
Computing Technology 10
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 2
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 2
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 12
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 3
Device Integration & Reliability 2
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 3
Other Electrical Power Sources & Devices 4
RF Power Sources & Devices 3
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 6
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 4
Mechanical, Thermal and Fluid-Related Technologies 10
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 7
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 2
Acoustic Propagation in Air & Water 1
Meteorology 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 24
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 7
Surface Protection Technologies 5
Industry 4.0 23
Simulation 3
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Cybersecurity 9
Industrial Internet of Things (IIoT) 8
The Cloud Computing 3
AS 9100 QMS 58
Academia / Cluster / Association 1
Aerospace 66
Aerospace Materials 20
Aerospace Power Plants and Related Equipments 7
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 9
Aircraft Engines 8
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 5
Maintenance Repair and Operations (MRO) 12
Onboard Equipment Systems 4
Production Equipment and Software 8
Unmanned Vehicle Aircraft (UAV, Drone) 20
Defence 22
Aerial Systems 11
Ammunition Technology 7
Ground Systems 14
Naval Systems 8
Defense Products 59
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 6
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 2
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 36
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 6
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 3
Space Launchers 3
Surveillance and Navigation Satellites 5
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 16
Weapons 18
Directed Energy Weapons 5
Gun Systems - Hand Held 10
Gun Systems - Platform Mounted 11
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 27
Education and Training 20
Events Organizer 1
Expert 10
Maintenance & Repair 14
Manufacturer 126
Media 32
Service Provider 144
Legal 93
Service Providers 12
Space 17
Supplier 34
Unmanned Vehicles & Platforms 26
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 2
I. Unmanned Aerial Systems 1
I. Unmanned Aerial Vehicles 2
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Mission Computer, Processing 1
Navigation, Guidance 3
Propulsion 2
Transport Vehicles 2
Vehicle Command and Control 2
Locations
Germany 1
Pakistan 1
NIL 1
Russia 1
Thailand 1
Turkey 5
Ankara 1
United Kingdom 1
United States 2
Pennsylvania 1
Washington 1
MXTREALITY
+18446972333
Write a review
MXTREALITY
in Modelling and Simulation Technology Virtual Reality Manufacturing Process Simulation Manufacturer Service Provider
(+1)
Simulation
3200 1st Ave South, STE 300,, Washington 98134, United States
We offer a unique set of multi-sensory solutions that can work on nearly every device, with an almost unlimited number of peripheral plug-ins to offer experiences that work for everyone, every device, every ability, everywhere.
+18446972333
Pulse Technologies
+12677330200
Write a review
Pulse Technologies
in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control
(+6)
Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer AS 9100 QMS
2000 AM Drive Quakertown, Pennsylvania 18951, United States
As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.
+12677330200
Fidesys LLC
+74951773618
Write a review
Fidesys LLC
in Simulation
Leninskie gory, 1 119991, Russia
Innovative CAE-system that performs a full cycle of engineering calculations, starting from building a computational mesh to the visualization of calculation results.
+74951773618
Masttech
+905356629060
Write a review
Masttech
in Metals and Metal Matrix Composite Ceramics, Ceramic Matrix Composite and Glass Joining Technology Structural Mechanics Forming
(+11)
Mathematical Modelling Development Software Verification and Accreditation Techniques Modelling and Simulation Technology Tactical / Crew Training systems Systems Engineering and Integrated Systems Design Fighting Land Vehicles Logistic, Command and Surveillance Land Vehicles Unmanned Land, Sea, Air Vehicles Manufacturer Service Provider Education and Training
ASO 1. Org. San. Böl. / Ahi Evran OSB Mah./ Nahçivan Cad. No: 8/2 Sincan / ANKARA, Turkey
Masttech was established in Ankara in 2019 as the latest Turkish-American joint venture company in the defense industry.
+905356629060
Yöntem Teknoloji ve Endüstri Ürünleri San. Tic. Ltd Şti.
+905327021292
Write a review
Yöntem Teknoloji ve Endüstri Ürünleri San. Tic. Ltd Şti.
in Modelling and Simulation Technology Skills Training Systems Tactical / Crew Training systems Virtual Reality Education and Training
ADİL MAH KEMERLER SK NO 6 KAT 2 SULTANBEYLİ İSTANBUL 34935, Turkey
YONTEM TEKNOLOJI is established in 1997 and active in Training Labs , Equipments , Sets and Simulator Manufacturing for Aviation, Maritime Training.
+905327021292
AlphaLink Engineering GmbH
Write a review
AlphaLink Engineering GmbH
in Flight Controls Autonomous Robots Simulation Education and Training Unmanned Vehicle Aircraft (UAV, Drone)
(+1)
Unmanned Vehicles & Platforms
Bismarckstr. 10-12, Berlin 10625, Germany
We get the best out of your unmanned systems!
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review
Advance Die-Casting Industry Co., Ltd.
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
Elektro Control Industries (Pvt) Ltd.
+923335156614
Write a review
Elektro Control Industries (Pvt) Ltd.
in Systems Engineering and Integrated Systems Design Safety systems Product Supportability Research & Technology Management Communication
(+8)
Pneumatic Electrical - Electronic Panels Components Integrated Modular Avionics Onboard Maintenance Systems Inert Gas System Weapon System Manufacturer Maintenance Repair and Operations (MRO)
PLOT #8, SERVICE ROAD EAST, SECTOR I-11/4, ISLAMABAD, NIL 44000, Pakistan
ECI Islamabad, is an engineering products development company and supporting Industrial, Defense & Commercial sectors in Pakistan & abroad from last 20 years. ECI provides design & development services to develop customized products to its customers.
+923335156614
Döksan Heat Treatment Jsc.
+905324316299
Write a review
Döksan Heat Treatment Jsc.
in Metals and Metal Matrix Composite Medical Products and Materials Project Management and Control Process Control Technology Procurement & Contracting Processes
(+2)
Manufacturer AS 9100 QMS
DÖKSAN ISIL İŞLEM, Uygurlar Caddesi, Sincan Osb Sincan, Ankara, Turkey
Our company, which carries out all heat treatment operations under one roof.
+905324316299
Ravenscourt Engineering Limited
+441454316361
Write a review
Ravenscourt Engineering Limited
in Project Management and Control Lean Manufacturing Environmentally Friendly Factory Processes Knowledge-based Engineering Service Provider
(+1)
AS 9100 QMS
Millbrook Road, Yate, South Gloucestershire, BS37 5PB, United Kingdom
Ravenscourt Engineering Limited is a specialist Electron Beam Welding company, possessing AS9100 and NADCAP accreditations.
+441454316361
KESTAS Broaching Tools
+902127982855
KESTAS Broaching Tools
in Structural Mechanics Mechanical / Hydraulic Technologies and Devices Design for Improved Reliability & Maintainability Advanced Prototyping Techniques and Systems for Production Manufact.
(+4)
Project Management and Control Gun Systems - Platform Mounted Gun Systems - Hand Held Manufacturer
Ömerli Mahallesi Mısır Sokak No:8 Arnavutköy İSTANBUL , Turkey
Founded in 1985, KESTAŞ is the undisputed leader of Turkey in the production of broaching tools. 7000 m2 closed area, specialized engineers and technicians especially in broaching tools, including of all kinds of broaching machines and spare parts.
+902127982855
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha

Download our app to your mobile phone

Available on the Apple Store
Sign In Register