List with Us Sign In

Listings in Forming, Visible / UV Wave Sensors, Directed Energy Weapons, Research & Technology Management, Cybersecurity and Supplier

Showing 12 of 59 results
Categories
Supplier 34
Defense Products 59
Business Processes 8
Research & Technology Management 3
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Whole Life Cycle Improvement 1
Weapons 18
Directed Energy Weapons 5
Gun Systems - Hand Held 10
Gun Systems - Platform Mounted 11
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 6
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 2
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 36
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 6
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 3
Space Launchers 3
Surveillance and Navigation Satellites 5
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 16
Defense Technologies 75
Sensor Systems 9
Visible / UV Wave Sensors 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Communications & CIS 15
Air Traffic Control Systems 2
Command & Information Systems Integration 3
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Communications systems-micro-and millimetre wave 1
Infrastructure to Support Information Management 1
Network Management Systems 4
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 21
Acoustic Designs 2
Aerodynamic Designs 3
Ballistic Designs 7
Electrical / Electronic Designs 5
Hydrodynamic Designs 1
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 4
Thermal / Cryogenic Designs 2
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 7
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 4
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 5
Integrated Systems 17
Health Monitoring Systems 2
Integrated System Testing and Evaluation 4
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 5
System Repair Technologies 3
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 13
Armour systems 7
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Manufacturing Processing / Design Tools 21
Advanced Prototyping 9
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 5
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 6
Techniques and Systems for Production Manufact. 6
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 10
Electrical Propulsion - rotary & linear 3
Final Drive - Wheels and Tracks 1
Gas Turbines 5
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 4
Transmissions and Powertrains 3
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 56
Structural Materials 24
Forming 10
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 7
Surface Protection Technologies 5
Chemical & Biological Materials 6
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 5
Computing Technology 10
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 2
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 2
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Electronic & Electrical Device Technology 12
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 3
Device Integration & Reliability 2
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 3
Other Electrical Power Sources & Devices 4
RF Power Sources & Devices 3
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 6
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 4
Information & Signal Processing 14
Data & Information Management Technology 5
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Mechanical, Thermal and Fluid-Related Technologies 10
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 7
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 2
Acoustic Propagation in Air & Water 1
Meteorology 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Industry 4.0 23
Cybersecurity 9
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Big Data and Analytics 4
Industrial Internet of Things (IIoT) 8
Simulation 3
The Cloud Computing 3
AS 9100 QMS 58
Academia / Cluster / Association 1
Aerospace 66
Aerospace Materials 20
Aerospace Power Plants and Related Equipments 7
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 9
Aircraft Engines 8
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 5
Maintenance Repair and Operations (MRO) 12
Onboard Equipment Systems 4
Production Equipment and Software 8
Unmanned Vehicle Aircraft (UAV, Drone) 20
Aviation (ATA 100 Chapters) 49
(Airborne) Auxiliary Power Unit (APU) 1
Accessory Gear Box (Engine Driven) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 4
Communication 7
Electrical - Electronic Panels Components 5
Electrical Power 4
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 3
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 3
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 4
Lights 1
Main Rotor Drive(S) 3
Main Rotor(S) 4
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Standard Practices And Structures - General 1
Surveillance 4
Tail Rotor 3
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Wings 1
Defence 22
Aerial Systems 11
Ammunition Technology 7
Ground Systems 14
Naval Systems 8
Distributor 27
Education and Training 20
Events Organizer 1
Expert 10
Maintenance & Repair 14
Manufacturer 126
Media 32
Service Provider 144
Legal 93
Service Providers 12
Space 17
Unmanned Vehicles & Platforms 26
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 2
I. Unmanned Aerial Systems 1
I. Unmanned Aerial Vehicles 2
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Mission Computer, Processing 1
Navigation, Guidance 3
Propulsion 2
Transport Vehicles 2
Vehicle Command and Control 2
Locations
Australia 3
QLD 1
Belgium 2
Brasil 1
Bulgaria 1
Canada 3
Czech Republic 1
Germany 3
India 8
Gujarat 2
Maharashtra 2
West Bengal 1
Ireland 1
Israel 1
Japan 1
Mexico 1
Pakistan 3
NIL 1
Sindh 1
Poland 1
Portugal 1
Singapore 1
Spain 3
Sweden 1
Switzerland 1
Thailand 1
Turkey 5
Ankara 1
Istanbul 1
United Arab Emirates 1
United Kingdom 1
United States 22
California 3
Florida 4
Illinois 1
Massachusetts 2
Michigan 1
Missouri 1
Nevada 1
New York 1
North Carolina 1
Pennsylvania 3
Utah 1
Washington 2
Wyoming 1
Type
Listing 59
Deal 5
ARMACO JSC
+35924485770
Write a review
ARMACO JSC
in Propellants Explosives Military Human Resources Ballistic Designs Weapon Guidance and Control systems
(+13)
Stores and Weapons Release / Discharge systems Mines - Land Missiles - Anti Air Missiles - Anti Surface (Sea) Gun Systems - Platform Mounted Gun Systems - Hand Held Directed Energy Weapons Mines - Sea Missiles - Anti Ground (Land) Torpedoes - Anti Surface Torpedoes - Anti Submarine Logistics Manufacturer
Armaco JSC. 106 Belovodski Pat - Armaco Building, Sofia 1616, Bulgaria
Our expertise in the defense industry spans more than two decades. The company is headquartered in the Republic of Bulgaria and its operations span in all major arms markets and services around the World.
+35924485770
Hufschmied Zerspanungssysteme GmbH
0823496640
Write a review
Hufschmied Zerspanungssysteme GmbH
in Manufacturer Supplier Big Data and Analytics Aerospace Power Plants and Related Equipments Aircraft Construction, Assembly and Sub-assembly
(+1)
Production Equipment and Software
Edisonstr. 11d, Bobingen 86399, Germany
HUFSCHMIED is Europe's leading manufacturer of material-related milling tools. The focus is on the production of milling tools and drills for plastics, fiberglass materials, and carbon materials (GFRP and CFRP).
0823496640
Engineering Technology Corporation
+1(801)486-8721
Write a review
Engineering Technology Corporation
in Manufacturer Service Provider Supplier Maintenance & Repair
2975 South 300 West, Utah 84115, United States
A leading expert in filament winding, composite solutions, and a complete service provider for the filament winding industry. Designer and manufacturer of filament winders, automated production lines, other filament winding equipment, and software.
+1(801)486-8721
AERO FASTENERS PVT. LTD.
+911125634810
Write a review
AERO FASTENERS PVT. LTD.
in Forming Mechanical / Hydraulic Technologies and Devices Mechanical Designs Weapon System Manufacturer
(+1)
AS 9100 QMS
A1/2C Chanakya Place Pankha Road New Delhi, Delhi 110059, India
Aero Fasteners Pvt. Ltd. is an AS9100D certified company, CAGE Code SBHU7, OASIS Identification Number (OIN) 6142211544.
+911125634810
Auto Lok nut
+32 58 515301
Write a review
Auto Lok nut
in Supplier Distributor Aircraft Construction, Assembly and Sub-assembly Aircraft Engines Maintenance Repair and Operations (MRO)
(+2)
Aerospace Materials Maintenance & Repair
Veurnestraat 4F 8691 Leisele, Belgium
Auto-Lok Double Slotted Nut The design concept of the double slotted nut is similar to that of the universally adopted industrial nut where the locking function is provided by a slotted collar or turret section above the hexagon.
+32 58 515301
Tennant Metall & Technologie GmbH
+492323965400
Write a review
Tennant Metall & Technologie GmbH
in Metals and Metal Matrix Composite Forming Manufacturer Supplier Distributor
(+2)
AS 9100 QMS Aerospace Materials
Tennant Metall & Technologie GmbH, Castroper Straße, Herne 44628, Germany
We are a Stockist certified to AS/EN 9120 and a Manufacturer certified to AS/EN 9100 of steels and other metallic alloys supplying the Aerospace and Defence Industries since 1988.
+492323965400
Seceon, Cyber Security Company
+1 (978)-923-0040
Write a review
Seceon, Cyber Security Company
in Service Provider Cybersecurity
238 Littleton Road Suite #206 Westford, Massachusetts 01886, United States
Seceon is global provider of the most advanced Artificial Intelligence driven cyber threat detection and remediation platforms for Enterprises and Managed Security Service Providers (MSSP).
+1 (978)-923-0040
DMD Solutions
+34666737318
Write a review
DMD Solutions
in Reliability and Maintainability of Systems Safety systems Design for Improved Reliability & Maintainability Service Provider Supplier
(+6)
Education and Training Aerial Systems Aerospace Power Plants and Related Equipments Maintenance Repair and Operations (MRO) Onboard Equipment Systems Unmanned Vehicle Aircraft (UAV, Drone)
Carrer Àlaba 140 Barcelona, 5è 3era 08018, Spain
DMD Solutions provides engineering services in the fields of aerospace design & certification with a focus on Reliability, Availability, Maintainability, and Safety in the aerospace industry.
+34666737318
SDi TOOLS : Your Cutting Edge
Write a review
SDi TOOLS : Your Cutting Edge
in Manufacturer Service Provider Supplier
F-56, MIDC, Ambad, Maharashtra 422010, India
Manufacturers of Special Cutting Tools for Machining of Aerospace Materials.
New Eagle
1-734-929-4557
Write a review
New Eagle
in Electric Motors Unmanned Land, Sea, Air Vehicles Supplier Distributor Unmanned Vehicle Aircraft (UAV, Drone)
(+7)
Electrical Subsystem Data Display and Controls Command and Control Subsystem I. Unmanned Maritime System I. Unmanned Ground Vehicles I. Unmanned Maritime Vehicle Vehicle Command and Control
110 Parkland Plaza, Ann Arbor, Michigan 48103, United States
New Eagle specializes in mechatronic control systems — the electronic brains that drive mechanical systems.
1-734-929-4557
RICARDO & BARBOSA, LDA.
+351926816160
Write a review
RICARDO & BARBOSA, LDA.
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Forming Other Satellites Manufacturer
(+1)
AS 9100 QMS
Zona Industrial das Mimosas 4510-330, Portugal
Established in 1978, Ricardo & Barbosa is one of the largest portuguese references in the manufacture of high precision tools for Automotive, Electronics, Energy, Oil&Gas and Aeronautics industries.
+351926816160
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review
Advance Die-Casting Industry Co., Ltd.
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
1 2 3 4 5
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha

Download our app to your mobile phone

Available on the Apple Store
Sign In Register