Listings in Protocol Technology, Secure Computing Techniques, Image/Pattern Processing Technology, Modelling and Simulation Technology, Sensor Systems, Non-Lethal Weapons, Data Display and Controls, Media and Knowledge-based Engineering

Categories

Media 6

Defense Products 55

Weapons 16

Non-Lethal Weapons 2

Directed Energy Weapons 5

Gun Systems - Hand Held 8

Gun Systems - Platform Mounted 10

Mines - Land 3

Mines - Sea 3

Missiles - Anti Air 8

Missiles - Anti Ground (Land) 5

Missiles - Anti Surface (Sea) 7

Torpedoes - Anti Submarine 4

Torpedoes - Anti Surface 3

Battlespace Information 6

Command & Control 1

Digitization of the Battlespace 1

ISTAR (Intelligence, Surveillance, Target Acquisit 3

Information Warfare 1

Military Intelligence 2

Business Processes 8

Benchmarking & Best Practice 1

Business Process Simulation 1

Concepts & Product Definition 1

Procurement & Contracting Processes 3

Product Supportability 2

Research & Technology Management 3

Whole Life Cycle Improvement 1

Defence Analysis 2

Military Doctrine Analysis 1

Platform and System Concept Studies 1

Tactical Develop. and Supp. to Operation/Training 1

Defence Policy and Functions - Support 5

Equipment Disposal & Enviromental Protection 1

IS (International Security) 2

Logistics 2

Equipped Personnel 3

Equipped Men 1

Training & Education 2

Installations 5

Battlefield Engineering 2

Fortifications/Defences 3

Ground Stations 1

T&E Facilities (Test and Evaluation Facilities) 1

Platforms 34

Combat Aircraft 8

Commercial Aircraft 4

Communications Satellites 5

Drone 13

Fighting Land Vehicles 10

Fighting Sea Surface Platforms 2

Helicopters 10

Lighter-than-Air Platforms 2

Logistic, Command and Surveillance Land Vehicles 9

Logistic, Support and Surveillance Aircraft 5

Other Satellites 2

Space Launchers 3

Surveillance and Navigation Satellites 4

Undersea Platforms 1

Unmanned Land, Sea, Air Vehicles 15

Defense Technologies 65

Sensor Systems 9

Acoustic Sensors - Active 1

Electrical & Electrochemical Sensors 1

Environmental Monitoring Systems 2

Explosive Detection Sensors 1

IR Sensors - Active 5

IR Sensors - Passive 5

Magnetic Sensors 1

Motion Sensor systems 1

RF Sensors / Antennas - Active 2

RF Sensors / Antennas -Passive 2

Visible / UV Wave Sensors 1

Manufacturing Processing / Design Tools 20

Knowledge-based Engineering 4

Advanced Prototyping 8

Concurrent Engineering and Reduced Design Cycle 3

Cost Engineering 2

Design for Improved Reliability & Maintainability 4

Environmentally Friendly Factory Processes 4

Lean Manufacturing 10

Manufacturing Process Simulation 7

Process Control Technology 7

Project Management and Control 5

Techniques and Systems for Production Manufact. 5

Communications & CIS 11

Air Traffic Control Systems 2

Command & Information Systems Integration 2

Communications & CIS Security systems 3

Communications systems - Acoustic 2

Communications systems - IR / Visible / UV 1

Infrastructure to Support Information Management 1

Network Management Systems 1

Optimisation, Planning & Decision Support systems 2

Design Aspects - Platforms and Weapons 19

Acoustic Designs 2

Aerodynamic Designs 2

Ballistic Designs 7

Electrical / Electronic Designs 4

Mechanical Designs 8

Optical Designs 1

Stealth Designs 1

Structural Designs 3

Thermal / Cryogenic Designs 1

Electronic Warfare & DEW 8

DET - Other 1

DET - RF 2

DET -Lasers 1

ECM - Acoustic 1

ECM - RF 1

EOCM - IR / Visible / UV 1

EOPM - IR / Visible / UV 1

EPM - RF 2

ESM - Communications 5

ESM - Non-Communications 1

Guidance & Control Weapons and Platforms 6

Display systems 1

Navigation systems 3

Platform Guidance and Control systems 3

Stores and Weapons Release / Discharge systems 1

Weapon Guidance and Control systems 4

Integrated Systems 14

Health Monitoring Systems 2

Integrated System Testing and Evaluation 3

Middleware systems 1

Reliability and Maintainability of Systems 1

Robotics and Automated systems in Operational Sys. 3

Safety systems 4

System Repair Technologies 2

Systems Engineering and Integrated Systems Design 6

Lethality & Platform Protection 12

Armour systems 6

Battle Damage Reduction Techniques 1

Defensive Aids Suite systems 1

Explosive Ordnance Disposal 2

Mine Detection and Clearance 2

Other Platform Protection Measures 1

Penetrators 2

Warheads 2

Personnel Protection Measures 2

CB & N Protection Systems - Physical 1

Physical Protection Systems - Environment 1

Physical Protection Systems - Threat 2

Propulsion and Powerplants 7

Electrical Propulsion - rotary & linear 1

Final Drive - Wheels and Tracks 1

Gas Turbines 3

Gun and Launch Tube Propulsion 1

Rocket Engines and Ramjets 2

Transmissions and Powertrains 2

Signature Control & Reduction 2

Electrical and Electrochemical Signatures 1

Radar Signatures 1

Simulators, Trainers and Synthetic Environment 8

Command & Staff Training Systems 1

Skills Training Systems 3

Tactical / Crew Training systems 4

Virtual Reality 3

Defense Underpinning Technologies 49

Computing Technology 8

Protocol Technology 1

Secure Computing Techniques 1

Architectures 1

Encryption/ Crypto Technology 3

High Integrity & Safety Critical Computing 1

Mathematical Modelling Development 4

OA Tools and Techniques 1

Software Engineering 5

Software Verification and Accreditation Techniques 4

Information & Signal Processing 13

Image/Pattern Processing Technology 6

Modelling and Simulation Technology 3

Data & Information Management Technology 4

Digital Signal Processing Technology 4

Information and Data Fusion Technology 4

Optical Signal Processing Technology 2

Optimisation & Decision Support Technology 2

Speech & Natural Language Processing Technology 2

Chemical & Biological Materials 5

Biological Agent Defence, Precursors 1

Chemical Agent Defence, Precursors 1

Medical Products and Materials 4

Electronic & Electrical Device Technology 9

Acoustic Power Sources & Devices 1

Device Concepts & Fabrication 2

Device Integration & Reliability 1

Electric Motors 2

Electrical Batteries 2

Inertial/Gravitational Devices 2

Other Electrical Power Sources & Devices 3

RF Power Sources & Devices 2

Electronic Materials 4

Insulating and Dielectric Materials 2

Magnetic Materials 1

Silicon-based Materials 3

Superconducting Materials 1

Energetic Materials and Plasma Technology 2

Explosives 2

Propellants 2

Pyrotechnics 1

Human Sciences 5

Human Performance Enhancement 1

Human Survivability, Protection & Stress Effects 2

Human-Factors Integration 1

Military Human Resources 3

Mechanical, Thermal and Fluid-Related Technologies 8

Fluid Dynamics Techniques 1

Fluid Mechanics-Phenomenological and Experimental 1

Lubrication Technology 2

Mechanical / Hydraulic Technologies and Devices 5

Thermal and Thermodynamic Technologies and Devices 4

Operating Environments 1

Acoustic Propagation in Air & Water 1

Photonic/Optical Materials & Device 3

Display Materials & Devices 2

IR/Visible/UV Detector Materials & Devices 1

Lasers (All Types) 1

Non-Laser Devices 1

Optical Materials & Devices 2

Transparent Materials 1

Signature Related Materials 6

Acoustic & Vibration Absorbing Materials 4

Radar Absorbing Materials & Coatings 3

Structural Materials 23

Ceramics, Ceramic Matrix Composite and Glass 2

Corrosion and Wear Control Technology 3

Forming 10

Joining Technology 4

Life Extension of Structural Materials 2

Materials Removal 2

Metals and Metal Matrix Composite 13

Polymers and Polymer Matrix Composite 3

Smart/Functional Materials for Structural Uses 1

Structural Mechanics 6

Surface Protection Technologies 5

Unmanned Vehicles & Platforms 22

Data Display and Controls 1

Command and Control Subsystem 1

Electrical Subsystem 1

Fire Control 1

I. Autonomous Surface Vehicles 1

I. Unmanned Aerial Systems 2

I. Unmanned Aerial Vehicles 3

I. Unmanned Ground Vehicles 1

I. Unmanned Maritime System 1

I. Unmanned Maritime Vehicle 1

Navigation, Guidance 3

Propulsion 2

Vehicle Command and Control 2

AS 9100 QMS 55

Academia / Cluster / Association 1

Aerospace 56

Aerospace Materials 17

Aerospace Power Plants and Related Equipments 6

Aerospace Sensors 8

Air Traffic Control 2

Aircraft Construction, Assembly and Sub-assembly 8

Aircraft Engines 7

Airport Equipments and Services 2

Cabin and Seat Layouts 3

Cargo and Logistics 2

Maintenance Repair and Operations (MRO) 11

Onboard Equipment Systems 4

Production Equipment and Software 7

Unmanned Vehicle Aircraft (UAV, Drone) 18

Aviation (ATA 100 Chapters) 45

(Airborne) Auxiliary Power Unit (APU) 1

Air Conditioning 2

Auto Flight 2

Bleed Air 1

Cabin Systems 3

Communication 6

Electrical - Electronic Panels Components 5

Electrical Power 3

Electrical Power Multiplexing 1

Electronic Warfare System 2

Engine 4

Engine - Fuel and Control 1

Engine Controls 2

Engine Indicating 1

Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2

Equipment /Furnishings 2

Fire Protection 3

Flight Controls 3

Folding Blades/Pylon 1

Fuel 1

Fuselage 3

Hydraulic Power 1

Ice And Rain Protection 2

In-Flight Fuel Dispensing 1

Indicating / Recording System 1

Inert Gas System 1

Information Systems 1

Integrated Modular Avionics 4

Landing Gear 3

Lights 1

Main Rotor Drive(S) 2

Main Rotor(S) 3

Missiles, Drones, and Telemetry 8

Multisystem 1

Nacelles/Pylons 2

Navigation 4

Oil 1

Onboard Maintenance Systems 1

Oxygen 1

Pneumatic 2

Power Plant 3

Rotors Flight Control 2

Stabilizers 3

Standard Practices And Structures - General 1

Surveillance 4

Tail Rotor 2

Tail Rotor Drive 2

Vacuum 1

Weapon System 3

Defence 20

Aerial Systems 11

Ammunition Technology 6

Ground Systems 13

Naval Systems 8

Distributor 23

Education and Training 11

Events Organizer 1

Expert 8

Industry 4.0 16

3D Printing 4

Augmented Reality 1

Autonomous Robots 1

Big Data and Analytics 4

Cybersecurity 5

Industrial Internet of Things (IIoT) 5

Simulation 3

The Cloud Computing 2

Maintenance & Repair 13

Manufacturer 109

Service Provider 37

Space 14

Supplier 27

+919823037009

Write a review

Sandeep Metal Craft Pvt. Ltd

D-16 M.I.D.C INDUSTRIAL AREA HINGNA, Maharashtra 440016, India

Established with an aim to offer the best, Sandeep Metalcraft Private Limited (SMPL) is one of the leading names in the field of Precision Manufacturing and Assembly.

+919823037009

+12677330200

Write a review

Pulse Technologies

in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control

2000 AM Drive Quakertown, Pennsylvania 18951, United States

As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.

+12677330200

+905324659048

Write a review

Nümerik Makina Mühendislik Döküm

in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.

Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey

Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.

+905324659048

(703) 880-4222

Write a review

Inertial Labs

39959 Catoctin Ridge Street, Virginia 20158, United States

Trailblazers in positioning, navigation solutions and orienting technologies for 20 years, Inertial Labs creates cutting-edge inertial solutions for air, land, and sea.

(703) 880-4222

1 2 3