Advertise with us! Sign In

Listings in Standard Practices And Structures - General, Secure Computing Techniques, Image/Pattern Processing Technology, Explosive Detection Sensors, Command & Information Systems Integration, Big Data and Analytics, Media and Knowledge-based Engineering

Showing 12 of 24 results
Categories
Media 6
Aviation (ATA 100 Chapters) 45
Standard Practices And Structures - General 1
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor Drive(S) 2
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Oxygen 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defense Technologies 65
Communications & CIS 11
Command & Information Systems Integration 2
Air Traffic Control Systems 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Manufacturing Processing / Design Tools 20
Knowledge-based Engineering 4
Advanced Prototyping 8
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 5
Techniques and Systems for Production Manufact. 5
Sensor Systems 9
Explosive Detection Sensors 1
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Integrated Systems 14
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 7
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Transmissions and Powertrains 2
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Defense Underpinning Technologies 49
Computing Technology 8
Secure Computing Techniques 1
Architectures 1
Encryption/ Crypto Technology 3
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Information & Signal Processing 13
Image/Pattern Processing Technology 6
Data & Information Management Technology 4
Digital Signal Processing Technology 4
Information and Data Fusion Technology 4
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Electronic & Electrical Device Technology 9
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Device Integration & Reliability 1
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Mechanical, Thermal and Fluid-Related Technologies 8
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 1
Acoustic Propagation in Air & Water 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Structural Materials 23
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Forming 10
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Industry 4.0 16
Big Data and Analytics 4
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Defense Products 55
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Business Processes 8
Benchmarking & Best Practice 1
Business Process Simulation 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Maintenance & Repair 13
Manufacturer 109
Service Provider 37
Space 14
Supplier 27
Unmanned Vehicles & Platforms 22
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
Locations
Australia 2
QLD 1
Brasil 1
Germany 2
Hungary 1
Budapest 1
India 5
Gujarat 3
Punjab 1
Spain 1
Switzerland 1
Turkey 5
Istanbul 2
United Arab Emirates 1
United Kingdom 2
United States 5
Alabama 1
California 2
Pennsylvania 1
South Dakota 1
Virginia 1
A.M.Designs Pvt. Ltd.
0091-79-29708170 Ext. 104
Write a review
A.M.Designs Pvt. Ltd.
in Surface Protection Technologies Manufacturing Process Simulation Lean Manufacturing Process Control Technology Knowledge-based Engineering
(+4)
Manufacturer AS 9100 QMS 3D Printing Space
Hariganga Society, Kathwada G.I.D.C Plot No. 24 Road, Odhav Rd, Ahmedabad, Gujarat 382430, India
A.M. Designs Pvt. Ltd. is an AS9100D and ISO9001:2015 certified company with a strong foundation in advanced manufacturing solutions for metallic components and assemblies for Aviation, Space, Defence, and Telecom industries.
0091-79-29708170 Ext. 104
Flymedia Technology
09888484310
Write a review Is this your listing?
Flymedia Technology Is this your listing?
in Media
Plot no, 20, Vishal Nagar Ext, opposite Kashish Cafe, Vishal Nagar, Jawaddi Taksal, Ludhiana, Punjab, Punjab 141013, India
We provide the services like SEO, SMO, etc. to our clients for growing their business.
09888484310
Polaris Sensor Technologies, Inc.
256-562-0087x7664
Write a review
Polaris Sensor Technologies, Inc.
in Mathematical Modelling Development Optical Designs IR Sensors - Active IR Sensors - Passive Explosive Detection Sensors
(+5)
Environmental Monitoring Systems Navigation systems Advanced Prototyping ISTAR (Intelligence, Surveillance, Target Acquisit Unmanned Vehicles & Platforms
200 Westside Sq, Ste 320, Alabama 35801-4875, United States
Founded in 2003, Polaris Sensor Technologies, Inc. is a leading electro-optic sensor company that specializes in enhancing thermal imagery with polarization.
256-562-0087x7664
KRYPTUS INFORMATION SECURITY S.A.
+551931125000
Write a review Is this your listing?
KRYPTUS INFORMATION SECURITY S.A. Is this your listing?
in Encryption/ Crypto Technology Command & Information Systems Integration Cybersecurity
RUA MARIA TEREZA DIAS DA SILVA, 270, Campinas, SP 13083820, Brasil
Kryptus, a Brazilian-Swiss company, provides encryption and cybersecurity solutions for Defense & Intelligence secure communication. We integrate hardware, software, and services, to offer cutting-edge technology free from all surveillance laws.
+551931125000
Pulse Technologies
+12677330200
Write a review
Pulse Technologies
in Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact. Project Management and Control
(+6)
Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer AS 9100 QMS
2000 AM Drive Quakertown, Pennsylvania 18951, United States
As contract manufacturers, we’ll produce your component or assembly at any quantity with speed, quality, and integrity.
+12677330200
Hufschmied Zerspanungssysteme GmbH
0823496640
Write a review
Hufschmied Zerspanungssysteme GmbH
in Manufacturer Supplier Big Data and Analytics Aerospace Power Plants and Related Equipments Aircraft Construction, Assembly and Sub-assembly
(+1)
Production Equipment and Software
Edisonstr. 11d, Bobingen 86399, Germany
HUFSCHMIED is Europe's leading manufacturer of material-related milling tools. The focus is on the production of milling tools and drills for plastics, fiberglass materials, and carbon materials (GFRP and CFRP).
0823496640
TopCSSGallery
7778865391
Write a review
TopCSSGallery
in Media
A-408 Shilp Aaron, Opp. Armieda, Nr. Pakvan, Sindhu Bhavan Road, , Bodakdev, Ahmedabad, Gujarat 380054, India
TopCSSGallery is a unique Web Design Portfolio global platform for showcasing and awarding the top websites.
7778865391
Universal Electronics Technology
+905326125100
Write a review
Universal Electronics Technology
in Optical Materials & Devices IR/Visible/UV Detector Materials & Devices Display Materials & Devices Image/Pattern Processing Technology Manufacturer
Çınar, Unıversal Elektronik, Teknoloji Ltd. Şti., Tahsin Bey Sokak, Maltepe, Istanbul, Turkey
We are a producer of high-end INFRARED ILLUMINATORS which are used as NIGHT VISION SUPPORT.
+905326125100
THEXOVISION LTD.
Write a review
THEXOVISION LTD.
in Software Engineering Image/Pattern Processing Technology Information and Data Fusion Technology
Downtown, Budapest, Hungary
THEXOVISION LTD. is a software development business specialised in real-time image/video processing.
Protonautics Pty Ltd
+61400433710
Write a review
Protonautics Pty Ltd
in Standard Practices And Structures - General Manufacturer AS 9100 QMS Space
23 Westgate St, Wacol, QLD 4076, Australia
Protonautics is an AS9100:D certified manufacturer of components for Aerospace and Defence clients. Our certification scope include machined components, chemical surface treatments and assembly services.
+61400433710
Bangaree Infotech Solutions
+91-9646763103
Write a review
Bangaree Infotech Solutions
in Media
Street No-3, AAA Tower, Chandigarh Rd, Near Veer Palace, Ludhiana, Punjab 141014, India
Bangaree Infotech Solutions is India’s leading SEO Company in Ludhiana and provides the finest Digital Marketing services in Ludhiana.
+91-9646763103
Nümerik Makina Mühendislik Döküm
+905324659048
Write a review
Nümerik Makina Mühendislik Döküm
in Design for Improved Reliability & Maintainability Cost Engineering Concurrent Engineering and Reduced Design Cycle Advanced Prototyping Techniques and Systems for Production Manufact.
(+7)
Project Management and Control Manufacturing Process Simulation Lean Manufacturing Process Control Technology Environmentally Friendly Factory Processes Knowledge-based Engineering Manufacturer
Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey
Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.
+905324659048
1 2
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha