Advertise with us! Sign In

Listings in Standard Practices And Structures - General, Oxygen, Forming, Encryption/ Crypto Technology, Information and Data Fusion Technology, Big Data and Analytics, Media and Business Process Simulation

Showing 12 of 29 results
Categories
Media 6
Aviation (ATA 100 Chapters) 45
Oxygen 1
Standard Practices And Structures - General 1
(Airborne) Auxiliary Power Unit (APU) 1
Air Conditioning 2
Auto Flight 2
Bleed Air 1
Cabin Systems 3
Communication 6
Electrical - Electronic Panels Components 5
Electrical Power 3
Electrical Power Multiplexing 1
Electronic Warfare System 2
Engine 4
Engine - Fuel and Control 1
Engine Controls 2
Engine Indicating 1
Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2
Equipment /Furnishings 2
Fire Protection 3
Flight Controls 3
Folding Blades/Pylon 1
Fuel 1
Fuselage 3
Hydraulic Power 1
Ice And Rain Protection 2
In-Flight Fuel Dispensing 1
Indicating / Recording System 1
Inert Gas System 1
Information Systems 1
Integrated Modular Avionics 4
Landing Gear 3
Lights 1
Main Rotor Drive(S) 2
Main Rotor(S) 3
Missiles, Drones, and Telemetry 8
Multisystem 1
Nacelles/Pylons 2
Navigation 4
Oil 1
Onboard Maintenance Systems 1
Pneumatic 2
Power Plant 3
Rotors Flight Control 2
Stabilizers 3
Surveillance 4
Tail Rotor 2
Tail Rotor Drive 2
Vacuum 1
Weapon System 3
Defense Products 55
Business Processes 8
Business Process Simulation 1
Benchmarking & Best Practice 1
Concepts & Product Definition 1
Procurement & Contracting Processes 3
Product Supportability 2
Research & Technology Management 3
Whole Life Cycle Improvement 1
Battlespace Information 6
Command & Control 1
Digitization of the Battlespace 1
ISTAR (Intelligence, Surveillance, Target Acquisit 3
Information Warfare 1
Military Intelligence 2
Defence Analysis 2
Military Doctrine Analysis 1
Platform and System Concept Studies 1
Tactical Develop. and Supp. to Operation/Training 1
Defence Policy and Functions - Support 5
Equipment Disposal & Enviromental Protection 1
IS (International Security) 2
Logistics 2
Equipped Personnel 3
Equipped Men 1
Training & Education 2
Installations 5
Battlefield Engineering 2
Fortifications/Defences 3
Ground Stations 1
T&E Facilities (Test and Evaluation Facilities) 1
Platforms 34
Combat Aircraft 8
Commercial Aircraft 4
Communications Satellites 5
Drone 13
Fighting Land Vehicles 10
Fighting Sea Surface Platforms 2
Helicopters 10
Lighter-than-Air Platforms 2
Logistic, Command and Surveillance Land Vehicles 9
Logistic, Support and Surveillance Aircraft 5
Other Satellites 2
Space Launchers 3
Surveillance and Navigation Satellites 4
Undersea Platforms 1
Unmanned Land, Sea, Air Vehicles 15
Weapons 16
Directed Energy Weapons 5
Gun Systems - Hand Held 8
Gun Systems - Platform Mounted 10
Mines - Land 3
Mines - Sea 3
Missiles - Anti Air 8
Missiles - Anti Ground (Land) 5
Missiles - Anti Surface (Sea) 7
Non-Lethal Weapons 2
Torpedoes - Anti Submarine 4
Torpedoes - Anti Surface 3
Defense Underpinning Technologies 49
Computing Technology 8
Encryption/ Crypto Technology 3
Architectures 1
High Integrity & Safety Critical Computing 1
Mathematical Modelling Development 4
OA Tools and Techniques 1
Protocol Technology 1
Secure Computing Techniques 1
Software Engineering 5
Software Verification and Accreditation Techniques 4
Information & Signal Processing 13
Information and Data Fusion Technology 4
Data & Information Management Technology 4
Digital Signal Processing Technology 4
Image/Pattern Processing Technology 6
Modelling and Simulation Technology 3
Optical Signal Processing Technology 2
Optimisation & Decision Support Technology 2
Speech & Natural Language Processing Technology 2
Structural Materials 23
Forming 10
Ceramics, Ceramic Matrix Composite and Glass 2
Corrosion and Wear Control Technology 3
Joining Technology 4
Life Extension of Structural Materials 2
Materials Removal 2
Metals and Metal Matrix Composite 13
Polymers and Polymer Matrix Composite 3
Smart/Functional Materials for Structural Uses 1
Structural Mechanics 6
Surface Protection Technologies 5
Chemical & Biological Materials 5
Biological Agent Defence, Precursors 1
Chemical Agent Defence, Precursors 1
Medical Products and Materials 4
Electronic & Electrical Device Technology 9
Acoustic Power Sources & Devices 1
Device Concepts & Fabrication 2
Device Integration & Reliability 1
Electric Motors 2
Electrical Batteries 2
Inertial/Gravitational Devices 2
Other Electrical Power Sources & Devices 3
RF Power Sources & Devices 2
Electronic Materials 4
Insulating and Dielectric Materials 2
Magnetic Materials 1
Silicon-based Materials 3
Superconducting Materials 1
Energetic Materials and Plasma Technology 2
Explosives 2
Propellants 2
Pyrotechnics 1
Human Sciences 5
Human Performance Enhancement 1
Human Survivability, Protection & Stress Effects 2
Human-Factors Integration 1
Military Human Resources 3
Mechanical, Thermal and Fluid-Related Technologies 8
Fluid Dynamics Techniques 1
Fluid Mechanics-Phenomenological and Experimental 1
Lubrication Technology 2
Mechanical / Hydraulic Technologies and Devices 5
Thermal and Thermodynamic Technologies and Devices 4
Operating Environments 1
Acoustic Propagation in Air & Water 1
Photonic/Optical Materials & Device 3
Display Materials & Devices 2
IR/Visible/UV Detector Materials & Devices 1
Lasers (All Types) 1
Non-Laser Devices 1
Optical Materials & Devices 2
Transparent Materials 1
Signature Related Materials 6
Acoustic & Vibration Absorbing Materials 4
Radar Absorbing Materials & Coatings 3
Industry 4.0 16
Big Data and Analytics 4
3D Printing 4
Augmented Reality 1
Autonomous Robots 1
Cybersecurity 5
Industrial Internet of Things (IIoT) 5
Simulation 3
The Cloud Computing 2
AS 9100 QMS 55
Academia / Cluster / Association 1
Aerospace 56
Aerospace Materials 17
Aerospace Power Plants and Related Equipments 6
Aerospace Sensors 8
Air Traffic Control 2
Aircraft Construction, Assembly and Sub-assembly 8
Aircraft Engines 7
Airport Equipments and Services 2
Cabin and Seat Layouts 3
Cargo and Logistics 2
Maintenance Repair and Operations (MRO) 11
Onboard Equipment Systems 4
Production Equipment and Software 7
Unmanned Vehicle Aircraft (UAV, Drone) 18
Defence 20
Aerial Systems 11
Ammunition Technology 6
Ground Systems 13
Naval Systems 8
Defense Technologies 65
Communications & CIS 11
Air Traffic Control Systems 2
Command & Information Systems Integration 2
Communications & CIS Security systems 3
Communications systems - Acoustic 2
Communications systems - IR / Visible / UV 1
Infrastructure to Support Information Management 1
Network Management Systems 1
Optimisation, Planning & Decision Support systems 2
Design Aspects - Platforms and Weapons 19
Acoustic Designs 2
Aerodynamic Designs 2
Ballistic Designs 7
Electrical / Electronic Designs 4
Mechanical Designs 8
Optical Designs 1
Stealth Designs 1
Structural Designs 3
Thermal / Cryogenic Designs 1
Electronic Warfare & DEW 8
DET - Other 1
DET - RF 2
DET -Lasers 1
ECM - Acoustic 1
ECM - RF 1
EOCM - IR / Visible / UV 1
EOPM - IR / Visible / UV 1
EPM - RF 2
ESM - Communications 5
ESM - Non-Communications 1
Guidance & Control Weapons and Platforms 6
Display systems 1
Navigation systems 3
Platform Guidance and Control systems 3
Stores and Weapons Release / Discharge systems 1
Weapon Guidance and Control systems 4
Integrated Systems 14
Health Monitoring Systems 2
Integrated System Testing and Evaluation 3
Middleware systems 1
Reliability and Maintainability of Systems 1
Robotics and Automated systems in Operational Sys. 3
Safety systems 4
System Repair Technologies 2
Systems Engineering and Integrated Systems Design 6
Lethality & Platform Protection 12
Armour systems 6
Battle Damage Reduction Techniques 1
Defensive Aids Suite systems 1
Explosive Ordnance Disposal 2
Mine Detection and Clearance 2
Other Platform Protection Measures 1
Penetrators 2
Warheads 2
Manufacturing Processing / Design Tools 20
Advanced Prototyping 8
Concurrent Engineering and Reduced Design Cycle 3
Cost Engineering 2
Design for Improved Reliability & Maintainability 4
Environmentally Friendly Factory Processes 4
Knowledge-based Engineering 4
Lean Manufacturing 10
Manufacturing Process Simulation 7
Process Control Technology 7
Project Management and Control 5
Techniques and Systems for Production Manufact. 5
Personnel Protection Measures 2
CB & N Protection Systems - Physical 1
Physical Protection Systems - Environment 1
Physical Protection Systems - Threat 2
Propulsion and Powerplants 7
Electrical Propulsion - rotary & linear 1
Final Drive - Wheels and Tracks 1
Gas Turbines 3
Gun and Launch Tube Propulsion 1
Rocket Engines and Ramjets 2
Transmissions and Powertrains 2
Sensor Systems 9
Acoustic Sensors - Active 1
Electrical & Electrochemical Sensors 1
Environmental Monitoring Systems 2
Explosive Detection Sensors 1
IR Sensors - Active 5
IR Sensors - Passive 5
Magnetic Sensors 1
Motion Sensor systems 1
RF Sensors / Antennas - Active 2
RF Sensors / Antennas -Passive 2
Visible / UV Wave Sensors 1
Signature Control & Reduction 2
Electrical and Electrochemical Signatures 1
Radar Signatures 1
Simulators, Trainers and Synthetic Environment 8
Command & Staff Training Systems 1
Skills Training Systems 3
Tactical / Crew Training systems 4
Virtual Reality 3
Distributor 23
Education and Training 11
Events Organizer 1
Expert 8
Maintenance & Repair 13
Manufacturer 109
Service Provider 37
Space 14
Supplier 27
Unmanned Vehicles & Platforms 22
Command and Control Subsystem 1
Data Display and Controls 1
Electrical Subsystem 1
Fire Control 1
I. Autonomous Surface Vehicles 1
I. Unmanned Aerial Systems 2
I. Unmanned Aerial Vehicles 3
I. Unmanned Ground Vehicles 1
I. Unmanned Maritime System 1
I. Unmanned Maritime Vehicle 1
Navigation, Guidance 3
Propulsion 2
Vehicle Command and Control 2
Locations
Australia 2
QLD 1
Austria 1
Brasil 1
France 1
Germany 3
Hungary 1
Budapest 1
India 8
Gujarat 2
Maharashtra 1
Punjab 1
Mexico 1
Portugal 1
Singapore 1
Spain 2
Switzerland 1
Thailand 1
Turkey 4
Istanbul 1
United Arab Emirates 2
United Kingdom 1
United States 3
California 2
Pennsylvania 1
Sandeep Metal Craft Pvt. Ltd
+919823037009
Write a review
Sandeep Metal Craft Pvt. Ltd
in Penetrators Mines - Land Missiles - Anti Air Missiles - Anti Surface (Sea) Gun Systems - Platform Mounted
(+13)
Gun Systems - Hand Held Directed Energy Weapons Non-Lethal Weapons Mines - Sea Missiles - Anti Ground (Land) Torpedoes - Anti Surface Torpedoes - Anti Submarine Product Supportability Business Process Simulation Benchmarking & Best Practice Manufacturer Ground Systems Ammunition Technology
D-16 M.I.D.C INDUSTRIAL AREA HINGNA, Maharashtra 440016, India
Established with an aim to offer the best, Sandeep Metalcraft Private Limited (SMPL) is one of the leading names in the field of Precision Manufacturing and Assembly.
+919823037009
AEROTF
+34916388377
Write a review
AEROTF
in Metals and Metal Matrix Composite Forming Materials Removal Distributor Aerospace Materials
P.I. Ventorro del Cano Villaconejos, 16 Alcorcón, Madrid 28925, Spain
With over 20 years of experience in the aeronautical market, AeroTF is a specialist in the distribution of components and tools for both commercial and military aircraft and helicopters, and the space sector.
+34916388377
Kappa Optronics GMBH
+4955089740
Write a review
Kappa Optronics GMBH
in Device Concepts & Fabrication Device Integration & Reliability Software Engineering Architectures Encryption/ Crypto Technology
(+10)
OA Tools and Techniques Software Verification and Accreditation Techniques Digital Signal Processing Technology Optical Signal Processing Technology Image/Pattern Processing Technology Information and Data Fusion Technology IR Sensors - Passive Visible / UV Wave Sensors Manufacturer AS 9100 QMS
Kappa optronics GmbH, Kleines Feld, Gleichen D-37130, Germany
Cameras and Vision Systems for Anything that Drives or Flies! Kappa has over 40 years of experience with application-specific cameras and vision systems in rugged and certifiable design – in small and mid-sized series.
+4955089740
Defensebridge
05322455776
Write a review
Defensebridge
in Manufacturer Service Provider Supplier Space Media
(+2)
Airport Equipments and Services Maintenance & Repair
Istanbul 34726, Turkey
Online Yellow Pages for Aeronautics, Space, Defense, and Industry 4.0
05322455776
Advance Die-Casting Industry Co., Ltd.
+66888727885
Write a review Is this your listing?
Advance Die-Casting Industry Co., Ltd. Is this your listing?
in Forming Data & Information Management Technology Advanced Prototyping Project Management and Control Manufacturing Process Simulation
(+4)
Process Control Technology Manufacturer AS 9100 QMS Aerospace Materials
Thailand, Chon Buri, Ban Bueng District, A.BangbunADVANCE DIE-CASTING INDUSTRY CO., LTD., Thailand
Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.
+66888727885
Defence Global Publication
Write a review
Defence Global Publication
in Service Provider Media Events Organizer
44 Peter Street, Manchester M2 5GP, United Kingdom
Leading Worldwide Defence & Security Publication.
Hufschmied Zerspanungssysteme GmbH
0823496640
Write a review
Hufschmied Zerspanungssysteme GmbH
in Manufacturer Supplier Big Data and Analytics Aerospace Power Plants and Related Equipments Aircraft Construction, Assembly and Sub-assembly
(+1)
Production Equipment and Software
Edisonstr. 11d, Bobingen 86399, Germany
HUFSCHMIED is Europe's leading manufacturer of material-related milling tools. The focus is on the production of milling tools and drills for plastics, fiberglass materials, and carbon materials (GFRP and CFRP).
0823496640
Bright Apps LLC
9254200133
Write a review Is this your listing?
Bright Apps LLC Is this your listing?
in Software Engineering Big Data and Analytics Industrial Internet of Things (IIoT) The Cloud Computing
712 Bancroft Road, California 94598, United States
Bright Apps is at the technology frontier, propelling advancements with AI and tailored software development. Offering robust solutions to enterprises and governments, responding to the modern digital landscape’s unique demands.
9254200133
AERO FASTENERS PVT. LTD.
+911125634810
Write a review
AERO FASTENERS PVT. LTD.
in Forming Mechanical / Hydraulic Technologies and Devices Mechanical Designs Weapon System Manufacturer
(+1)
AS 9100 QMS
A1/2C Chanakya Place Pankha Road New Delhi, Delhi 110059, India
Aero Fasteners Pvt. Ltd. is an AS9100D certified company, CAGE Code SBHU7, OASIS Identification Number (OIN) 6142211544.
+911125634810
Turbo Cast (India) Pvt. Ltd.
+919825107090
Write a review
Turbo Cast (India) Pvt. Ltd.
in Metals and Metal Matrix Composite Forming Optical Materials & Devices Display Materials & Devices Medical Products and Materials
(+7)
Mechanical / Hydraulic Technologies and Devices Thermal and Thermodynamic Technologies and Devices Fluid Mechanics-Phenomenological and Experimental Power Plant Weapon System Manufacturer AS 9100 QMS
35 / Silver Sand, Opp - Big Bazaar, 150 Feet Ring Road, Rajkot 360 001, India
Turbo Cast (India) Pvt. Ltd. is India's First Indigenous Investment Casting Foundry, started in 2015, especially for Aerospace, Defense, Medical & Aluminum Alloy, Accredited for AS9100D & Nadcap (NDT & Welding) certification.
+919825107090
CTECH Information Technologies Inc.
+902162905286
Write a review
CTECH Information Technologies Inc.
in Software Engineering Protocol Technology Secure Computing Techniques Encryption/ Crypto Technology Mathematical Modelling Development
(+15)
Software Verification and Accreditation Techniques Data & Information Management Technology Digital Signal Processing Technology Optical Signal Processing Technology Image/Pattern Processing Technology Speech & Natural Language Processing Technology Communication Navigation Electrical - Electronic Panels Components Multisystem Integrated Modular Avionics Information Systems Electronic Warfare System Manufacturer Space
Teknopark İstanbul, TGB, Sanayi Mah. Teknopark Bulvarı, No:1, Blok:1 Kat:2 Kurtköy-Pendik, Istanbul 34912, Turkey
C Tech Information Technologies Inc. founded in 2005, operates in Defense, Aerospace, Satellite Technologies, Communication Systems, Cyber Security, Modeling and Simulation.
+902162905286
RICARDO & BARBOSA, LDA.
+351926816160
Write a review
RICARDO & BARBOSA, LDA.
in Metals and Metal Matrix Composite Polymers and Polymer Matrix Composite Forming Other Satellites Manufacturer
(+1)
AS 9100 QMS
Zona Industrial das Mimosas 4510-330, Portugal
Established in 1978, Ricardo & Barbosa is one of the largest portuguese references in the manufacture of high precision tools for Automotive, Electronics, Energy, Oil&Gas and Aeronautics industries.
+351926816160
1 2 3
Message successfully sent
Sorry, we could not complete your request, please try again later.
Send a message to
captcha
Review successfully sent
Sorry, we could not complete your request, please try again later.

Your rating
captcha