Listings in The Cloud Computing, Standard Practices And Structures - General, Software Engineering, Secure Computing Techniques, Modelling and Simulation Technology, Sensor Systems, Data Display and Controls, Media and Knowledge-based Engineering

Categories

Media 6

Aviation (ATA 100 Chapters) 45

Standard Practices And Structures - General 1

(Airborne) Auxiliary Power Unit (APU) 1

Air Conditioning 2

Auto Flight 2

Bleed Air 1

Cabin Systems 3

Communication 6

Electrical - Electronic Panels Components 5

Electrical Power 3

Electrical Power Multiplexing 1

Electronic Warfare System 2

Engine 4

Engine - Fuel and Control 1

Engine Controls 2

Engine Indicating 1

Engine-Turbine/Turboprop, Ducted Fan/Unducted Fan 2

Equipment /Furnishings 2

Fire Protection 3

Flight Controls 3

Folding Blades/Pylon 1

Fuel 1

Fuselage 3

Hydraulic Power 1

Ice And Rain Protection 2

In-Flight Fuel Dispensing 1

Indicating / Recording System 1

Inert Gas System 1

Information Systems 1

Integrated Modular Avionics 4

Landing Gear 3

Lights 1

Main Rotor Drive(S) 2

Main Rotor(S) 3

Missiles, Drones, and Telemetry 8

Multisystem 1

Nacelles/Pylons 2

Navigation 4

Oil 1

Onboard Maintenance Systems 1

Oxygen 1

Pneumatic 2

Power Plant 3

Rotors Flight Control 2

Stabilizers 3

Surveillance 4

Tail Rotor 2

Tail Rotor Drive 2

Vacuum 1

Weapon System 3

Defense Technologies 65

Sensor Systems 9

Acoustic Sensors - Active 1

Electrical & Electrochemical Sensors 1

Environmental Monitoring Systems 2

Explosive Detection Sensors 1

IR Sensors - Active 5

IR Sensors - Passive 5

Magnetic Sensors 1

Motion Sensor systems 1

RF Sensors / Antennas - Active 2

RF Sensors / Antennas -Passive 2

Visible / UV Wave Sensors 1

Manufacturing Processing / Design Tools 20

Knowledge-based Engineering 4

Advanced Prototyping 8

Concurrent Engineering and Reduced Design Cycle 3

Cost Engineering 2

Design for Improved Reliability & Maintainability 4

Environmentally Friendly Factory Processes 4

Lean Manufacturing 10

Manufacturing Process Simulation 7

Process Control Technology 7

Project Management and Control 5

Techniques and Systems for Production Manufact. 5

Communications & CIS 11

Air Traffic Control Systems 2

Command & Information Systems Integration 2

Communications & CIS Security systems 3

Communications systems - Acoustic 2

Communications systems - IR / Visible / UV 1

Infrastructure to Support Information Management 1

Network Management Systems 1

Optimisation, Planning & Decision Support systems 2

Design Aspects - Platforms and Weapons 19

Acoustic Designs 2

Aerodynamic Designs 2

Ballistic Designs 7

Electrical / Electronic Designs 4

Mechanical Designs 8

Optical Designs 1

Stealth Designs 1

Structural Designs 3

Thermal / Cryogenic Designs 1

Electronic Warfare & DEW 8

DET - Other 1

DET - RF 2

DET -Lasers 1

ECM - Acoustic 1

ECM - RF 1

EOCM - IR / Visible / UV 1

EOPM - IR / Visible / UV 1

EPM - RF 2

ESM - Communications 5

ESM - Non-Communications 1

Guidance & Control Weapons and Platforms 6

Display systems 1

Navigation systems 3

Platform Guidance and Control systems 3

Stores and Weapons Release / Discharge systems 1

Weapon Guidance and Control systems 4

Integrated Systems 14

Health Monitoring Systems 2

Integrated System Testing and Evaluation 3

Middleware systems 1

Reliability and Maintainability of Systems 1

Robotics and Automated systems in Operational Sys. 3

Safety systems 4

System Repair Technologies 2

Systems Engineering and Integrated Systems Design 6

Lethality & Platform Protection 12

Armour systems 6

Battle Damage Reduction Techniques 1

Defensive Aids Suite systems 1

Explosive Ordnance Disposal 2

Mine Detection and Clearance 2

Other Platform Protection Measures 1

Penetrators 2

Warheads 2

Personnel Protection Measures 2

CB & N Protection Systems - Physical 1

Physical Protection Systems - Environment 1

Physical Protection Systems - Threat 2

Propulsion and Powerplants 7

Electrical Propulsion - rotary & linear 1

Final Drive - Wheels and Tracks 1

Gas Turbines 3

Gun and Launch Tube Propulsion 1

Rocket Engines and Ramjets 2

Transmissions and Powertrains 2

Signature Control & Reduction 2

Electrical and Electrochemical Signatures 1

Radar Signatures 1

Simulators, Trainers and Synthetic Environment 8

Command & Staff Training Systems 1

Skills Training Systems 3

Tactical / Crew Training systems 4

Virtual Reality 3

Defense Underpinning Technologies 49

Computing Technology 8

Secure Computing Techniques 1

Software Engineering 5

Architectures 1

Encryption/ Crypto Technology 3

High Integrity & Safety Critical Computing 1

Mathematical Modelling Development 4

OA Tools and Techniques 1

Protocol Technology 1

Software Verification and Accreditation Techniques 4

Information & Signal Processing 13

Modelling and Simulation Technology 3

Data & Information Management Technology 4

Digital Signal Processing Technology 4

Image/Pattern Processing Technology 6

Information and Data Fusion Technology 4

Optical Signal Processing Technology 2

Optimisation & Decision Support Technology 2

Speech & Natural Language Processing Technology 2

Chemical & Biological Materials 5

Biological Agent Defence, Precursors 1

Chemical Agent Defence, Precursors 1

Medical Products and Materials 4

Electronic & Electrical Device Technology 9

Acoustic Power Sources & Devices 1

Device Concepts & Fabrication 2

Device Integration & Reliability 1

Electric Motors 2

Electrical Batteries 2

Inertial/Gravitational Devices 2

Other Electrical Power Sources & Devices 3

RF Power Sources & Devices 2

Electronic Materials 4

Insulating and Dielectric Materials 2

Magnetic Materials 1

Silicon-based Materials 3

Superconducting Materials 1

Energetic Materials and Plasma Technology 2

Explosives 2

Propellants 2

Pyrotechnics 1

Human Sciences 5

Human Performance Enhancement 1

Human Survivability, Protection & Stress Effects 2

Human-Factors Integration 1

Military Human Resources 3

Mechanical, Thermal and Fluid-Related Technologies 8

Fluid Dynamics Techniques 1

Fluid Mechanics-Phenomenological and Experimental 1

Lubrication Technology 2

Mechanical / Hydraulic Technologies and Devices 5

Thermal and Thermodynamic Technologies and Devices 4

Operating Environments 1

Acoustic Propagation in Air & Water 1

Photonic/Optical Materials & Device 3

Display Materials & Devices 2

IR/Visible/UV Detector Materials & Devices 1

Lasers (All Types) 1

Non-Laser Devices 1

Optical Materials & Devices 2

Transparent Materials 1

Signature Related Materials 6

Acoustic & Vibration Absorbing Materials 4

Radar Absorbing Materials & Coatings 3

Structural Materials 23

Ceramics, Ceramic Matrix Composite and Glass 2

Corrosion and Wear Control Technology 3

Forming 10

Joining Technology 4

Life Extension of Structural Materials 2

Materials Removal 2

Metals and Metal Matrix Composite 13

Polymers and Polymer Matrix Composite 3

Smart/Functional Materials for Structural Uses 1

Structural Mechanics 6

Surface Protection Technologies 5

Industry 4.0 16

The Cloud Computing 2

3D Printing 4

Augmented Reality 1

Autonomous Robots 1

Big Data and Analytics 4

Cybersecurity 5

Industrial Internet of Things (IIoT) 5

Simulation 3

Unmanned Vehicles & Platforms 22

Data Display and Controls 1

Command and Control Subsystem 1

Electrical Subsystem 1

Fire Control 1

I. Autonomous Surface Vehicles 1

I. Unmanned Aerial Systems 2

I. Unmanned Aerial Vehicles 3

I. Unmanned Ground Vehicles 1

I. Unmanned Maritime System 1

I. Unmanned Maritime Vehicle 1

Navigation, Guidance 3

Propulsion 2

Vehicle Command and Control 2

AS 9100 QMS 55

Academia / Cluster / Association 1

Aerospace 56

Aerospace Materials 17

Aerospace Power Plants and Related Equipments 6

Aerospace Sensors 8

Air Traffic Control 2

Aircraft Construction, Assembly and Sub-assembly 8

Aircraft Engines 7

Airport Equipments and Services 2

Cabin and Seat Layouts 3

Cargo and Logistics 2

Maintenance Repair and Operations (MRO) 11

Onboard Equipment Systems 4

Production Equipment and Software 7

Unmanned Vehicle Aircraft (UAV, Drone) 18

Defence 20

Aerial Systems 11

Ammunition Technology 6

Ground Systems 13

Naval Systems 8

Defense Products 55

Battlespace Information 6

Command & Control 1

Digitization of the Battlespace 1

ISTAR (Intelligence, Surveillance, Target Acquisit 3

Information Warfare 1

Military Intelligence 2

Business Processes 8

Benchmarking & Best Practice 1

Business Process Simulation 1

Concepts & Product Definition 1

Procurement & Contracting Processes 3

Product Supportability 2

Research & Technology Management 3

Whole Life Cycle Improvement 1

Defence Analysis 2

Military Doctrine Analysis 1

Platform and System Concept Studies 1

Tactical Develop. and Supp. to Operation/Training 1

Defence Policy and Functions - Support 5

Equipment Disposal & Enviromental Protection 1

IS (International Security) 2

Logistics 2

Equipped Personnel 3

Equipped Men 1

Training & Education 2

Installations 5

Battlefield Engineering 2

Fortifications/Defences 3

Ground Stations 1

T&E Facilities (Test and Evaluation Facilities) 1

Platforms 34

Combat Aircraft 8

Commercial Aircraft 4

Communications Satellites 5

Drone 13

Fighting Land Vehicles 10

Fighting Sea Surface Platforms 2

Helicopters 10

Lighter-than-Air Platforms 2

Logistic, Command and Surveillance Land Vehicles 9

Logistic, Support and Surveillance Aircraft 5

Other Satellites 2

Space Launchers 3

Surveillance and Navigation Satellites 4

Undersea Platforms 1

Unmanned Land, Sea, Air Vehicles 15

Weapons 16

Directed Energy Weapons 5

Gun Systems - Hand Held 8

Gun Systems - Platform Mounted 10

Mines - Land 3

Mines - Sea 3

Missiles - Anti Air 8

Missiles - Anti Ground (Land) 5

Missiles - Anti Surface (Sea) 7

Non-Lethal Weapons 2

Torpedoes - Anti Submarine 4

Torpedoes - Anti Surface 3

Distributor 23

Education and Training 11

Events Organizer 1

Expert 8

Maintenance & Repair 13

Manufacturer 109

Service Provider 37

Space 14

Supplier 27

+905324659048

Write a review

Nümerik Makina Mühendislik Döküm

Nümerik Makina Mühendislik ltd şti, Osb/Odunpazarı/Eskişehir, Turkey

Nümerik Makina Mühendislik Döküm San. ve Tic. Ltd. Şti: Defense and Aerospace Machining, EDM, Casting Model Manufacturing and Fixture, Gage Design Manufacturing.

+905324659048

0091-79-29708170 Ext. 104

Write a review

A.M.Designs Pvt. Ltd.

in Surface Protection Technologies Manufacturing Process Simulation Lean Manufacturing Process Control Technology Knowledge-based Engineering

Hariganga Society, Kathwada G.I.D.C Plot No. 24 Road, Odhav Rd, Ahmedabad, Gujarat 382430, India

A.M. Designs Pvt. Ltd. is an AS9100D and ISO9001:2015 certified company with a strong foundation in advanced manufacturing solutions for metallic components and assemblies for Aviation, Space, Defence, and Telecom industries.

0091-79-29708170 Ext. 104