Article by:
Space NSS
The Recon™ series of Pan & Tilt Positioners provide unparalleled performance in all weather conditions and environments.
The National Space Society (NSS) supports the recent UK government proposal for operational space solar power (SSP) by 2040. Prepared by the Frazer-Nash Consultancy, the report states that “Space-Based Solar Power is a renewable technology which provides continuous baseload power without intermittency and could be available at large scale. It therefore warrants further exploration as it could offer new options and contribute to the Net Zero pathways.”
Two power station designs were concluded to be technically and economically viable in the report—the hyper-modular SPS Alpha design by NSS Board member John Mankins and the SSP CASSIOPeiA design by Ian Cash of the UK. While SSP has been deemed technically viable for decades, recent projected reductions in cost make it appear to be inevitable.
Notably, the expense of launching items into space has dropped by a factor of 14 times since the space shuttle era and is expected to drop further when SpaceX’s Starship becomes operational. The cost of constructing space solar power satellites will also drop when the modules are built in volume. The new hyper-modular SSP designs take advantage of this, and the UK study calculates the projected cost using this approach to SSP to be competitive with other energy technologies.
Randy Gigante, NSS Policy Committee Chair, supports the phased approach outlined in the study. This includes a 500-megawatt demonstrator in orbit by 2032, and the connection of two gigawatts of SSP to the power grid by 2040. “The Frazer-Nash report suggests that, with an appropriate near-term R&D effort, the cost barrier for SSP can be broken,” Gigante said. “This can have a positive effect on climate change in general and net-zero emissions in particular.”
To maintain this schedule, the public sector would need to fund about 473 million dollars (350 million pounds) over the next five years to complete Phase 1 of the program. The UK Government has already established a one-billion-pound fund to accelerate the commercialization of low-carbon technologies, and proposals are being sought for dual-use technology development that could assist both space-based and Earth-based power systems. The current deadline for submission of ideas is November 1 and can be submitted here. More information will be forthcoming as part of the United Nations COP26 Climate Change conference in November 2021 in Glasgow, Scotland.
See the NSS website for more information on space solar power.
A copy of the new UK report, “Space-Based Solar Power: De-risking the Pathway to Net Zero,” is available in the online NSS Space Solar Power Library.
Image: Artist’s conception of the hyper-modular SPS Alpha design by John Mankins. Credit: John Mankins.
The Recon™ series of Pan & Tilt Positioners provide unparalleled performance in all weather conditions and environments.
The Inertial Labs Two and Three Axis Gyroscopes (TAG-200 and TAG-300) are developed for Electro-Optical Systems, Gimbals, Line-of-Sight and Pan & Tilt Platforms for stabilization and pointing applications.
+90 3D Digital Factory has the largest 3D printing capacity in the Middle East with more than 10 large format industrial printers with different technologies and materials.
Fuel Efficiency and Safety with Shadin’s Proven Accuracy and Reliability.
Bemsco is dedicated and committed to meeting the exacting standards of the Aerospace industry in the manufacture of a wide variety of aircraft, commercial, OEM and ground related accessories.
SoluNox UAV Solutions & Launching System has the expertise in design and development of fourth generation launching systems for High Mass and High Speed Target Drones.
For heating of tents and shelters in camps using electricity.
The M3-P Police Borescope is used by agencies like public security, armed police, fire fighting, customs, etc.
Menatek is extensively capable of satisfying its customers’ all needs regarding the suspension systems.
Innovative In-House Made Subsystems Upon Customer.
Our reputation as a supplier of innovative electronic solutions has resulted in our products being used in various land, sea and air applications for over 20 years.
Alatus Aerosystems is an industry leader and key strategic partner in the aerospace industry.
We have a dedicated and highly experienced pool of avionics, aerospace engineers, mechatronics naval architects; marine engineers, experts in IT domain, mechanical engineering etc.
TopCSSGallery is a unique Web Design Portfolio global platform for showcasing and awarding the top websites.
Grabysur, manufacturer/supplier of electronic aeronautic equipment forv military & civil aircraft cockpits, tanks, submarines, ships, helicopters, flight simulators, mro repairs & maintenance. TIER 1, PART 145 MRO, EASA, ISO.
Established with an aim to offer the best, Sandeep Metalcraft Private Limited (SMPL) is one of the leading names in the field of Precision Manufacturing and Assembly.
Since 2009 a leading Materials Company focused on the Rapid Prototyping and Rapid Manufacturing Industries.
As a research institute and service provider, sometimes conflicting goals exist. Creative solutions require freedom, while sometimes accuracy and organization are essential for the client.
YONTEM TEKNOLOJI is established in 1997 and active in Training Labs , Equipments , Sets and Simulator Manufacturing for Aviation, Maritime Training.
Manned and Unmanned Platforms for Surveillance and Law Enforcement
DMD Solutions provides engineering services in the fields of Reliability, Availability, Maintainability, and Safety for design and certification for the aerospace industry.
B.K Steel Company prides itself on its position as a leading distributor and stockist of ‘Tool, Alloy, and Special Steels In India.’
Log in with Google