Browse our Suppliers and their Products & Services, listed below the article:

TF


In order to meet Turkish Air Force (TurAF) requirements beyond 2030s, an indigenous design and development program aims to replace the aging F-16 fleet of TurAF.

 

Within the scope of TF-X Program, Turkey will become one of the few countries to possess the necessary technologies, engineering infrastructure, and production capabilities. Once the engineering activities on all the critical technologies are accomplished (e.g. increased situational awareness, sensor fusion, low observability, weapon bay, …etc), which are needed by a 5th generation (or beyond) jet fighter aircraft.

 

TF-X aircraft is planned to be kept operational in the TurAF inventory until 2070s and will be interoperable with other critical assets of TurAF such as F-35As.

 

The TF-X indigenous design and development program prime contract between the Undersecretariat for Defence Industries (SSM) of the Ministry of Turkish National Defence and Turkish Aerospace has been signed on 5th of August 2016.

 

The timing of this signature alone is a key demonstrator of Turkey’s determination of running mega-projects uninterruptedly, even under extraordinary conditions.

 

Currently, the prime contract covers the initial four (4) years (starting after the signature of major subcontracts) which will end up with the completion of the preliminary design phase. Within this period beyond the design and development of TF-X Aircraft, engineering capabilities, technology development activities (for key sensors like radar, electronic warfare..etc.), test infrastructures establishment and certification processes will be performed, and extensive capabilities for a new generation jet fighter design, development and production will be gained by Turkish industry.

 

TF-X aircraft will be a multi-role aircraft, it will be designed mainly for the air-to-air roles with consideration to air-to-surface roles as well. Upon engineering analysis, TF-X aircraft will be a multi-role aircraft, it will be designed mainly for the air-to-air roles with consideration to air-to-surface roles as well. Upon engineering analysis, and preliminary calculations, based on received information from suppliers of candidate engines, TF-X aircraft is decided to be a twin-engine configuration.

 

Turkish Fighter-TF, the 5+ Generation Multirole Fighter Aircraft, provides significant capabilities in both Air to Surface and Air to Air combat requirements. Turkish Aerospace’s survivable, strong and agile platform Turkish Fighter is a fully aware warrior, with intelligent and strong combat capabilities.

 

Turkish Fighter provides air dominance through:


- Increased air to air engagement ranges with Novel Weapons
- Precise and accurate weapon firing from internal weapon bays at high/supersonic speed
- Augmented lethality with support of Artificial Intelligence and Neural Networks.

Defense News & Articles

Browse our Suppliers and their Products & Services

Products & Services

more products or services
Laser Based Manufacturing
Laser Based Manufacturing

The Photonics Technologies are considered as Key Enabling Technologies (KETs). The Laser Technology applied to materials processing give key advantages in terms of productivity, flexibility and efficiency.

Shell Molding
Shell Molding

Shell moulding also known as shell-mould casting, is an expendable mold casting process that uses a resin covered sand to form the mold.

Propulsion Systems
Propulsion Systems

A&M have manufactured Wankel rotary engines for multiple customers and we developed our own engine cooling technology for a Midlands Aerospace Alliance NATEP (National Aerospace Technology Exploitation) project.

Inertial Labs, Railway Motion Control Unit (RMCU)
Inertial Labs, Railway Motion Control Unit (RMCU)

The Inertial Labs RMCU utilizes 3-axes each of precision MEMS accelerometers, miniature Fluxgate magnetometers and MEMS gyroscopes to provide accurate Heading, Pitch and Roll of the device under measure.

Rotor – High Precision Turning And 5 Axis Wire Cutting
Rotor – High Precision Turning And 5 Axis Wire Cutting

AARAN 1 Engineering PVT Ltd started business in 2017 following a number of successful business start ups from it’s management team with in the Aerospace sector.

AIS-450 Synchro
AIS-450 Synchro

The AIS-450 Synchro is a DO-160-qualified hardware platform designed to solve integration challenges in Synchro avionics systems.

TR-2 Long Endurance Scout Drone
TR-2 Long Endurance Scout Drone

The TR-2 flight time is more than one hour, and it is a system for the longest flight with pure electricity. Camera devices can be replaced, with automatic flight path planning and multiple fail-safe designs.

Ader Savunma, Black Oxide Coating
Ader Savunma, Black Oxide Coating

Chemical blacking is for iron and iron alloy metal surfaces by creating a black oxide layer. It provides a pitch black appearance and minimum light reflection.

Fasteners
Fasteners

With over 20 years of experience in the aeronautical market, AeroTF is a specialist in the distribution of components and tools for both commercial and military aircraft and helicopters and the space sector.

MIL Spec Fasteners and Aerospace Fasteners
MIL Spec Fasteners and Aerospace Fasteners

AFT understands the complexities and responsibilities of being a vendor to the US government, its military branches and private aerospace industries.

Aircraft Interior Components and Seating
Aircraft Interior Components and Seating

We manufacture a full range of aircraft interior components and seating from Super First Class and First Class Pods through to Business, Premium and Economy cabins.

Laser Marking
Laser Marking

Our company is currently branding its broaching tools using the Fiber Laser Marking device.

AerospacePay, CARDZ3N

The Premier Payment Provider for the Aerospace & Defense Industry

Flymedia Technology
in Media

We provide the services like SEO, SMO, etc. to our clients for growing their business.

BLADE BROTHERS KNIVES

Blade Brothers Knives is a Ukrainian company specializing in designing and manufacturing high-quality knives. BB Knives creates versatile knives for use in extreme conditions, designed for the military, survivalists, and hunters.

Cross & Associates Manufacturing Incorporated

Cross & Associates Manufacturing Inc. (CAM) is a precision machine shop located in Ottawa, ON, Canada serving the High Tech sectors including Aerospace, Defense, Telecommunications, Bio-medical, and Transportation. We are AS9100D as well as ISO 9001.

B.K. Steel Company

B.K Steel Company prides itself on its position as a leading distributor and stockist of ‘Tool, Alloy, and Special Steels In India.’

Engineering Technology Corporation

A leading expert in filament winding, composite solutions, and a complete service provider for the filament winding industry. Designer and manufacturer of filament winders, automated production lines, other filament winding equipment, and software.

IEC INFRARED SYSTEMS LLC

IEC Infrared Systems (IEC) specializes in the design, development, and manufacture of thermal and infrared imaging surveillance systems for the defense industry.

Download our app to your mobile phone