+90 3D Digital Factory has the largest 3D printing capacity in the Middle East with more than 10 large format industrial printers with different technologies and materials.
The TAI/AgustaWestland T129 ATAK is a twin-engine, tandem seat, multi-role, all-weather attack helicopter based on the Agusta A129 Mangusta platform. The T129 was developed by Turkish Aerospace Industries (TAI) with partner AgustaWestland.The helicopter is designed for advanced attack and reconnaissance missions in hot and high environments and rough geography in both day and night conditions.
T129A is the "combat support" version equipped with a 20 mm gatling gun and rounds and can carry 70 mm (2.75 in) rockets; nine T129As have been ordered. Six helicopters have been delivered to the Turkish Army. The T129As are to be upgraded to the T129B standard.
T129BT129B is the "multi-role" version equipped with electronic warfare systems. 51 helicopters are to be produced, with one to be used as a weapons testbed. The T129B is armed with a 20 mm gatling gun and can carry a payload of a maximum of 8 UMTAS ATGMs, 16 Cirit missiles, 8 air-launched Stinger, 76 mm (2.75 in) unguided rockets.
Crew: 2
Length: 14.54 m (47 ft 8 in)
Height: 3.4 m (11 ft 2 in)
Max takeoff weight: 5,056 kg (11,147 lb)
Powerplant: 2 × LHTEC CTS800-4A turboshaft, 1,014 kW (1,360 hp) each
Main rotor diameter: 11.9 m (39 ft 1 in)
Main rotor area: 111.22 m2 (1,197.2 sq ft)
Maximum speed: 281 km/h (175 mph, 152 kn) ("maximum cruise speed")
Range: 537 km (334 mi, 290 nmi)
Ferry range: 1,000 km (620 mi, 540 nmi)
Endurance: 3 hr
Service ceiling: 4,572 m (15,000 ft)
Rate of climb: 13.26 m/s (2,610 ft/min) , vertical climb rate 7.3 m/s
Guns: 1× M197 20x102 mm (0.787 in) three-barrel rotary cannon (500 rounds)
Hardpoints: 4, with provisions to carry combinations of:
Rockets: maximum 4 pods with
76 (19×4) / 48 (12×4): 70 mm (2.75 in) unguided rockets such as MKE FFAR, Hydra 70, CRV7
Missiles:
8 (4×2) UMTAS: 160 mm UMTAS and L-UMTAS anti-tank guided missiles.
16 (4×4) Cirit: 70 mm guided missile used against lightly armored/unarmored targets
8 (2×4) Air-to-Air Stinger (ATAS): short-range air-to-air missile
Other: 2 (1×2) Drop tanks: 294 kg each
+90 3D Digital Factory has the largest 3D printing capacity in the Middle East with more than 10 large format industrial printers with different technologies and materials.
Thanks to the TITRA Swarm Software, the basic features of individual unmanned aerial vehicles can be developed to go beyond the basic range of tasks of individual UAVs and forces, where they can operate in different swarm formations.
Based on our decade-long experience in the design and development of flight control solutions for manned and unmanned aircraft, we build the flight controller of the future.
Shadin’s broad portfolio of TSO part numbers and installation approvals offer a solution to virtually any aircraft with a flow requirement from 0.6 gph to 450 gph.
We’ve developed advanced laser texturing techniques to create controlled surface roughness for improved bonding strength, particularly for bonding between plastic and metal surfaces of a component or assembly.
Accord has a rich portfolio of GPS and GNSS semiconductor chips spanning RF front ends, digital accelerators and SOC’s.
Engineered for partners and resellers in the remote sensing industry, the Remote Sensing Payload Instrument, or RESEPI®, is a combined Dual Antenna GNSS-Aided Inertial Navigation System, datalogger, LiDAR, camera and communications system.
A&M have manufactured Wankel rotary engines for multiple customers and we developed our own engine cooling technology for a Midlands Aerospace Alliance NATEP (National Aerospace Technology Exploitation) project.
The vibration stethoscope.
Heavy lift Hybrid machine, designed for long endurance and vast range missions. Employed in some of the hardest environments in the world, from the snow-capped mountains in Canada to the harsh deserts of outback Australia.
We have designed and manufactured the ultimate classic Mini A+5 high performance engine block and auxiliaries.
When performance and effciency cannot be compromised ‘MANJNEEQ MR1-1’ is the ultimate solution, developed in joint collaboration with SoluNox Launching Systems and Pakistan Aeronautical Complex Kamra.
We get the best out of your unmanned systems!
Menatek is the leading high-tech manufacturer and the largest supply chain manager of Türkiye and the MENA Region on heavy to light military vehicles, all types of tactical & combat platforms and its wide range of strategic suppliers.
Ocean Air is one of the leading global aircraft parts suppliers and distributors of military and commercial aircraft products for the aircraft aftermarket.
Aquascape Engineers Pvt Ltd is one of an Indian AS9100D Certified Company & specialized in Aerospace CNC machining, particularly in high precision components with complex geometries, ensures that your product specifications are met on time.
Square-Biz is a kind of Private Intelligence service, but in a different way than the usual one. We also provide innovations in several fields, including Defense.
Sensitron has over 50 years of heritage as a leading manufacturer of high reliability power electronic component solutions for the Defense, Aerospace, Space,Medical and other high reliability markets.
YONTEM TEKNOLOJI is established in 1997 and active in Training Labs , Equipments , Sets and Simulator Manufacturing for Aviation, Maritime Training.
Advanced Armour Engineering is a medium-sized privately held company specializing in precision mechanical welding, precision cut, and cold-formed components.
Electromagnetic custom shielding solution covering from magnetic to electric and plain weave to 40 GHz and qualifications with our instrument in our private laboratory, the SOLIANI EMC have a qualification EN 9100.
Innovative CAE-system that performs a full cycle of engineering calculations, starting from building a computational mesh to the visualization of calculation results.
RCF Technologies, founded in 1975, is a woman owned, Hubzone certified company, designing and manufacturing components for industries including aerospace, automotive, marine, defense and industrial.
Precision engineering supplies, manufacturing bespoke components and tooling for Aerospace, F1, Motorsports, oil, gas and marine, space and UAV engine systems.