All-terrain vehicle is designed for every terrain. It offers attractive powerful engine mix, live and maneuverable hydrostatic drive as well as extreme terrain performance.
SpaceX goes all-in on Starship configuration for second-gen Starlink. SpaceX has dropped a plan to use Falcon 9 to launch the 30,000 satellites in its proposed second-generation Starlink broadband constellation and is instead focusing on a configuration leveraging its upcoming Starship vehicle.
The decision follows development progress that SpaceX said exceeded the company’s expectations and means it could start “launching the Gen2 system as early as March 2022,” SpaceX lawyer William Wiltshire said in a Jan. 7 letter to the Federal Communications Commission.
Starship missions are subject to a favorable environmental review into SpaceX’s launch facility at Boca Chica, Texas, which the Federal Aviation Administration expects to complete Feb. 28.
SpaceX currently has FCC approval to deploy 4,408 satellites to low Earth orbit at an altitude of around 550 kilometers and has launched more than half of them to date. The FCC has not yet approved SpaceX’s plans for the larger, second-generation constellation. SpaceX asked the FCC to expedite approval now that it has settled on the Starship-launched configuration.
All-terrain vehicle is designed for every terrain. It offers attractive powerful engine mix, live and maneuverable hydrostatic drive as well as extreme terrain performance.
The machine is primarily intended for support of engineer troops and finds its application during natural disasters when there is a need for immediate action to save lives and property.
Medium lift professional multirotor platform, employed in very hard environments. A modular system allowing 'plug and fly' interchangeable arms, to enable easy transition from four to eight rotor configuration or to quickly replace damaged parts.
Polyethylene Level III Loaded Bundle: 2 Level III Polyethylene plates, 1 Minuteman Plate Carrier and 1 5.56 Quick Draw Triple Mag Pouch
FIFISH P3 is one of the best underwater drones intended for exploration of reservoirs. The Terra Hexen company is a Partner of the QYSEA company and exclusive distributor of this device in Central Europe.
De-icer on truck with a working height of 16.5m
+90 3D Digital Factory has the largest 3D printing capacity in the Middle East with more than 10 large format industrial printers with different technologies and materials.
As certified stockist and processing company in accordance to EN 9100 and EN 9120, we offer your company an extensive range of products. Below you will find an overview of the most common and mostly available grades.
Revolutionizing UAV Integration and Support to First Responders in Critical Situations
The DA and INFInject combination of competencies originated the first Hybrid Generator enabling extended missions.
Quantix™ Mapper is a quick and easy to use mapping KEY BENEFITS solution. Now you can immediately view high resolution geospatial imagery on the spot – no other devices, internet or software required.
The Straton Plus is an armoured personnel carrier (APC) offered in LAV (Light Armoured Vehicle) and LTV (Light Tactical Vehicle) versions.
Ravenscourt Engineering Limited is a specialist Electron Beam Welding company, possessing AS9100 and NADCAP accreditations.
Founded in 2003, Polaris Sensor Technologies, Inc. is a leading electro-optic sensor company that specializes in enhancing thermal imagery with polarization.
With over 20 years of experience in the aeronautical market, AeroTF is a specialist in the distribution of components and tools for both commercial and military aircraft and helicopters, and the space sector.
YONTEM TEKNOLOJI is established in 1997 and active in Training Labs , Equipments , Sets and Simulator Manufacturing for Aviation, Maritime Training.
We provide comprehensive component manufacturing services in-house as well as through our group of tightly controlled secondary service partners.
AAA USA is an on-site manufacturing company that offers specialized subcontracting and technical assistance services related to industrialization, production and supplier monitoring processes in the Aerospace and Transportation sectors.
Protonautics is an AS9100:D certified manufacturer of components for Aerospace and Defence clients. Our certification scope include machined components, chemical surface treatments and assembly services.
Distribution of raw materials for the airline and aerospace industry. We also manufacture roll form sections. We support customers around the world.
Turbo Cast (India) Pvt. Ltd. is India's First Indigenous Investment Casting Foundry, started in 2015, especially for Aerospace, Defense, Medical & Aluminum Alloy, Accredited for AS9100D & Nadcap (NDT & Welding) certification.
Electromagnetic custom shielding solution covering from magnetic to electric and plain weave to 40 GHz and qualifications with our instrument in our private laboratory, the SOLIANI EMC have a qualification EN 9100.