Browse our Suppliers and their Products & Services, listed below the article:

Airbus Can Meet Production Targets Despite Russian Titanium Constraints


Airbus’ plans to aggressively ramp up aircraft production are on track, despite new constraints on the global supply of Russian titanium, a critical metal for aerospace manufacturing.

The European airframer quashed rumors that its A320 and A350 production increases will be delayed by titanium-supply issues. “We continue to assess the impact of the current situation in detail, but we do not see any issue in the short to medium term,” an Airbus spokesperson said. “Regardless, we are accelerating our efforts to secure alternative sources of supply.”

Airbus previously indicated that it sourced as much as half of its titanium needs from Russia. It continues to buy the metal from the country. “Airbus is directly sourcing titanium from Russia as well as from other countries, and indirectly sourcing it from Tier 1 suppliers,” the spokesperson said. “This is done in accordance with all sanctions and applicable export control regulations in place.”

Airbus plans to increase production of its A320 family to 65 aircraft per month by the middle of next year, an aggressive target that analysts and even Air Lease Corp. Executive Chairman Steven Udvar-Hazy has questioned. Last year, analysts pointed to other supply chain problems, not least of which were staffing issues at the airframer’s suppliers.

But CEO Guillaume Faury stood by the company’s targets and said Airbus can deliver 20 percent more aircraft this year compared with last year. “We are ready,” he said in February before the conflict began.

Before the war in Ukraine, Russia provided up to 20 percent of the world’s raw titanium, and VSMPO-AVISMA is the world’s largest producer of metal for the aerospace industry. Before the conflict, Boeing and VSMPO-AVISMA were in a joint venture to provide part of the U.S. airframer’s titanium requirements. But European, Japanese, and U.S. sanctions have prompted aerospace firms to avoid Russian supplies of the metal in order to comply with broader sanctions. China, Japan, Kazakstan, and the U.S. produce the balance of the world’s supply of titanium.

Earlier this year, Boeing CEO David Calhoun assured investors that the company’s supply of the metal was secure. “As long as the geopolitical situation stays tame, no problem,” he said on January 26. “If it doesn’t, we’re protected for quite a while, but not forever.”

But the company started diversifying its supply in 2014 after Russia annexed the Crimean Peninsula. Boeing accelerated the process after Russia invaded Ukraine on February 24, and has since suspended all-titanium purchases from the country.

“Our inventory and diversity of titanium sources provide sufficient supply for airplane production and we will continue to take the right steps to ensure long-term continuity,” a Boeing spokesperson said. “As aerospace is a longer cycle business, we largely have longer-term agreements that bridge short-term supply issues, which give us priority and protection from the fluctuations in the market.”

Embraer sourced much of its titanium from Russia before the war broke out, raising questions about its ability to meet its delivery targets this year. But in a recent filing with the U.S. Securities and Exchange Commission, the Brazilian airframer said it had enough supplies for the near term.

“Embraer informs that there is no immediate concern over the availability of titanium in its supply chain, considering its strong current inventory position and the existing contracts for the provision of this material with companies in other countries,” the company said. “Embraer will continue to monitor its supply chain and to seek alternative sources.”

Aeronautics News & Articles

Browse our Suppliers and their Products & Services

Products & Services

more products or services
MILMAST Military Trailer ANT
MILMAST Military Trailer ANT

MILMAST Military Trailer ANT, with its lightweight aluminum body and rigid design, is especially designed to help the armed forces carry their heavy loads easily on the front line.

Polyethylene Level III Loaded Bundle
Polyethylene Level III Loaded Bundle

Polyethylene Level III Loaded Bundle: 2 Level III Polyethylene plates, 1 Minuteman Plate Carrier and 1 5.56 Quick Draw Triple Mag Pouch

PTA - 400
PTA - 400

The PTA-400 is a transportable satellite antenna, designed for used in different appplications and in different bands.

ROOSTER, Thermal Camera
ROOSTER, Thermal Camera

The Rooster is a small, lightweight Thermal Camera which can be mounted on top of the helmet.

CDMA Transceiver
CDMA Transceiver

The CDMA Transceiver gives software solution for establishing telemetry and video link between two distant points.

International Armored Group, Certified VR7 Toyota Land Cruiser 300
International Armored Group, Certified VR7 Toyota Land Cruiser 300

International Armored Group is the FIRST company in the world to have tested and successfully certified the all new Toyota Land Cruiser 300 series.

Robotics and Automation
Robotics and Automation

Robotics is expanding its scope of application to more open working environments, unstructured and interactive, while incorporating greater possibilities for autonomy, adaptability and intelligence.

EMI Filter Modules
EMI Filter Modules

We are Custom Design specialists, manufacturing filter and transient suppression modules in multi-port configurations.

Menatek Defense Technologies, Powertrain
Menatek Defense Technologies, Powertrain

Menatek manufactures various powertrain components including pistons, piston rings & sleeves, connecting & main bearings, forged and cast crankshafts, connecting rods, camshafts, inlet, and outlet exhaust valves.

Poweration Inc., AC/DC Power Supplies and Distribution Units
Poweration Inc., AC/DC Power Supplies and Distribution Units

The High-Efficiency Power Supply and Power Distribution Unit generate both AC and DC power from the AC source.

AAA United States: Production Realization
AAA United States: Production Realization

Transform your product goals into reality with AAA USA’s production realization services.

Elektro Control Industries (Pvt) Ltd.

ECI Islamabad, is an engineering products development company and supporting Industrial, Defense & Commercial sectors in Pakistan & abroad from last 20 years. ECI provides design & development services to develop customized products to its customers.

Advance Die-Casting Industry Co., Ltd.

Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.

Thermobile Industries B.V.

THERMOBILE PROVIDES MOBILE, ROBUST HEATERS AND COOLING UNITS TO OPERATE IN THE HARSH CONDITIONS OFTEN FOUND IN MILITARY ENVIRONMENTS.

Cobtec Ltd.

Founded in March 2004, COBTEC.,LTD is a high-tech enterprise specializing in the business of optical devices. At the beginning, CoBTec imports the optical device from USA, Europe and Russia to distribute them in China.

OPTOELECTRONICA 2001 S.A

S.C. OPTOELECTRONICA 2001 S.A is a Romanian owned stock company founded in the year 2000 as a result of the reorganization of the optoelectronic domain.

Ranger Point Precision LLC

Ranger Point Precision LLC is a performance parts manufacturer for Marlin, Henry, Rossi, and Winchester lever-action rifles.

BNR EXPORTS

We are pleased to Introduce BNR EXPORTS as a 100% EOU established in the year 2000 Manufacturing precision machined and turned components.

Sistem Teknik Industrial Furnaces Inc.

Established in 1979, our company specializes in the design and production of melting and heat treatment furnaces for the aluminium industry as well as autoclaves and curing ovens for carbon fibre composite materials.

Saha Istanbul

Being one of the world’s most influential clusters in the defence and aerospace sectors.

Sherani Engineering

Sherani Engineering is an engineering solution design and manufacturing company having rich experience working for Automotive and aerospace industries deploying on turnkey basis complete Jigs, Fixtures, Assembly equipment, setting up mass production

CSM Industry

CSM Industry is a manufacturer of MULTI-PURPOSE TELESCOPIC EXCAVATOR for the defense sector.

TH-EXOVISION LTD.

TH-EXOVISION LTD. is a software development business specialised in real-time image/video processing.

Download our app to your mobile phone