Browse our Suppliers and their Products & Services, listed below the article:

Airbus Aircrafts


Airbus  delivered an estimated 66 aircraft in November, which leaves the record-setting 137 jets in December to reach its 2022 targets. According to sources, the world's biggest plane maker has delivered 563 planes this year, up from 497 from January until October 31st or 495 after the adjustment to two deliveries that were blocked due to Russian sanctions.

An Airbus spokesperson refused to discuss the November estimate pending an audit of the company's internal processes. A surge that came in late pushed November higher than was initially anticipated, but it failed to clear doubts on the 2022 goal, which is "around 700" with a few weeks until the end of the calendar year, sources claimed. 

Airbus will release its November delivery schedule in December. 8th, which could be a time to provide any updates on goals for the end of the year. Two sources claimed this had not been completely ruled out, and they noted Airbus has a history of good news at the end of the year. On Tuesday, the CEO Guillaume Faury appeared to tie any decision on the goal to the results in the closing weeks of November. When asked if Airbus was on the right track with its 2022 goal, the company declined to provide a direct response; however, he said he'd better understand at the end of November and warned that the supply chain "remains very complex. Analyst at Jefferies Chloe Lemarie said in a note that the monitoring of deliveries and test flights suggested that there had been about 65 deliveries during November.

 

Conclusion:

In November, Airbus continued its relentless efforts to meet its ambitious 2022 targets for aircraft deliveries. The company achieved a remarkable milestone by delivering an estimated 66 aircraft during the month, bringing the total number of aircraft delivered in 2022 to an impressive 563. This substantial increase in deliveries compared to the previous year showcased Airbus's dedication and determination to excel in the aerospace industry.

While this surge in deliveries in November was higher than initially anticipated, it did not dispel doubts surrounding the company's year-end goal of "around 700" deliveries. The company has faced challenges, including supply chain complexities and external factors like Russian sanctions affecting delivery schedules. As the year draws to a close, Airbus remains committed to providing updates on its progress and the status of its 2022 target.

The upcoming release of Airbus's November delivery schedule on December 8th will be critical, possibly shedding light on whether the company is on track to meet its year-end goal. Historically, Airbus has had a knack for sharing positive news as the year concludes, and observers eagerly await any announcements that could offer insights into the company's performance.

Airbus's CEO, Guillaume Faury, has hinted that the decision on the 2022 goal may be influenced by the results achieved in the closing weeks of November. While the company refrained from directly responding to its progress, it acknowledged the complexity of the supply chain and the challenges it presents.

Airbus continues to be a dominant force in the aerospace world, striving to overcome obstacles and set new records. Monitoring deliveries and test flights suggests that November witnessed approximately 65 aircraft deliveries, underscoring the company's determination to achieve its goals. As the year ends, all eyes are on Airbus, eagerly anticipating its year-end performance report and the confirmation of whether it can reach its 2022 targets.

 

 

FAQ (Frequently Asked Questions):

What are Airbus's 2022 delivery targets? 

Airbus has set a target of delivering "around 700" aircraft in 2022.

 

How many aircraft did Airbus deliver in November 2022? 

Airbus delivered an estimated 66 aircraft in November 2022, contributing to its year-to-date total.

 

What challenges has Airbus faced in meeting its delivery targets? 

Airbus has encountered challenges related to the complexity of its supply chain and external factors such as sanctions affecting delivery schedules.

 

When will Airbus release its November delivery schedule and year-end updates? 

Airbus is expected to release its November delivery schedule on December 8th, which could provide updates on its progress toward meeting its 2022 targets.

 

Has Airbus historically shared positive news at the end of the year? 

Yes, Airbus has a history of making positive announcements and updates as the calendar year ends.

 

What is the significance of the estimated 65 deliveries in November? 

The estimated 65 deliveries in November indicate Airbus's commitment to achieving its goals and progressing towards its 2022 delivery target.

Aeronautics News & Articles

Browse our Suppliers and their Products & Services

Products & Services

more products or services
DIN RAIL MOUNTING BRACKETS, PLASTIC PCB SPACERS
DIN RAIL MOUNTING BRACKETS, PLASTIC PCB SPACERS

Card Raiser Distance series is designed to give various distances between electronic circuits.

INJECTION MOLDING
INJECTION MOLDING

Molding services include gas-assist molding, over-molding, and insert molding.

Broaching Tools
Broaching Tools

Our factory has a workshop where we can manufacture broaching tools up to 150 mm in diameter and up to 2000 mm in-hole profiles.

Custom Precision Solutions, Inc.: High Power Density Motors, Controllers & Power Converters
Custom Precision Solutions, Inc.: High Power Density Motors, Controllers & Power Converters

Our Elite Business Partner has provided custom brushless DC motor & controller solutions for military, aerospace, medical, and industrial clients.

3D QUALITY CONTROL
3D QUALITY CONTROL

Point cloud data that is acquired by 3D optic scanning and a CAD model of the object is compared, and differences are presented as a quality control report.

Inertial Labs, Two and Three Axis Gyroscopes (TAG)
Inertial Labs, Two and Three Axis Gyroscopes (TAG)

The Inertial Labs Two and Three Axis Gyroscopes (TAG-200 and TAG-300) are developed for Electro-Optical Systems, Gimbals, Line-of-Sight and Pan & Tilt Platforms for stabilization and pointing applications.

ALPiN Unmanned Helicopter
ALPiN Unmanned Helicopter

Capable of fully autonomous take-off and landing, ALPIN is a unique platform designed to complete all missions by flying to predefined points.

Insulation
Insulation

It is critical that pipes, ducts, and other components utilized in high-temperature environments receive proper thermal insulation.

Increase Airport Safety and Optimize Ground Services Management
Increase Airport Safety and Optimize Ground Services Management

SYSNAV is enabling accurate positioning and increased security for airport ground vehicles.

Custom Precision Solutions, Inc.

Custom-Engineered Mechanical, Electro-Mechanical & Fluidic Motion Control Devices, Established to provide the most advanced, custom-engineered, mechanical, electromechanical & fluidic motion control and position devices.

Schatz Bearing Corporation

We have a long history in development and design of custom bearings that meet demanding application requirements.

RCF Technologies Inc

RCF Technologies, founded in 1975, is a woman owned, Hubzone certified company, designing and manufacturing components for industries including aerospace, automotive, marine, defense and industrial.

Accurate Components Corp.

We manufacture the best Quality Fasteners and Precision Parts in the marketplace.

Boring Rifles

We are a rifle builder that doesn’t blend in. We are less than Boring and we want everyone to see the awesome rifles we create!

Protonautics Pty Ltd

Protonautics is an AS9100:D certified manufacturer of components for Aerospace and Defence clients. Our certification scope include machined components, chemical surface treatments and assembly services.

Baker Manufacturing, Inc.

Baker Manufacturing is a third-generation, family-owned business that crafts high precision metal parts and tooling for the aerospace and maritime industries. The company is based in Washington, with a second location in Texas.

Anemo Engineering BV

Anemo Engineering: Experts in quick (dis)connect fasteners.

Ader Savunma

ADER DEFENCE A.Ş. is the result of the collaboration of a team of experts in order to improve the industrial and high-tech manufacturing capabilities of Turkey.

AerospacePay, CARDZ3N

The Premier Payment Provider for the Aerospace & Defense Industry

OPTOKON, a.s.

OPTOKON a.s. is a company with over 30 years of experience in the information and communications technology market.

Download our app to your mobile phone