Browse our Suppliers and their Products & Services, listed below the article:

A strong geomagnetic storm is heading toward Earth, space forecasters say


The National Oceanic and Atmospheric Administration’s Space Weather Prediction Center on Wednesday issued a geomagnetic storm watch following recent explosions on the sun that have triggered strong solar flares and multiple “coronal mass ejections” that could reach the planet on Thursday.

NOAA defines a geomagnetic storm as “a major disturbance of Earth's magnetosphere that occurs when there is a very efficient exchange of energy from the solar wind into the space environment surrounding Earth.”

“The largest storms that result from these conditions are associated with solar coronal mass ejections (CMEs) where a billion tons or so of plasma from the sun, with its embedded magnetic field, arrives at Earth,” NOAA explains.

While most of this week’s disturbances are expected to have little to no impact, there is a chance that the expected storm could reach a level of 3 out of 5 on the geomagnetic storm severity scale.

 

Slide reading: Minor-strong geomagnetic storm watches for 17-19 Aug. Geomagnetic storm watches are in effect for 17-19 Aug due to coronal high speed stream and coronal mass ejection influences. A lengthy CH is anticipated to affect Earth first, on 17 Aug, with likely G1 conditions. An escalation to G3 storm levels is now probably on 18 Aug due to several CMEs combining and beginning to arrive. Conditions are anticipated to remain favorable for G2 levels on 19 Aug.

 

That could cause power grid fluctuations and briefly disrupt satellite, radio and GPS communications, NOAA said.

The geomagnetic storm’s arrival also means that the northern lights could be visible as far south as Iowa on Thursday.

According to the official space forecast, the auroras “might be seen over the far Northeast, to the far upper Midwest, across portions of the north-central states, and perhaps over the northwest section of Washington state.”

While auroras are not uncommon, the likelihood of a collision of multiple coronal mass ejections — a celestial event referred to as “cannibal coronal mass ejections” — has some sky watchers anticipating a brighter than usual light show.

In July, the northern lights were “so bright that photographers captured the colorful show even in the heart of Seattle, where light pollution typically mutes visibility,” Fox Weather’s Andrew Wulfeck said.

Others are just excited about the solar eruptions.

“The sun just hurled a plume of cool, dark plasma into space,” astronomer Tony Phillips wrote in a blog post. “Don’t miss the impact.”

If you do miss it, though, don’t worry too much. NASA said last month that in the current solar cycle, “solar events will continue to increase as we near solar maximum in 2025.”

Space News & Articles

Browse our Suppliers and their Products & Services

Products & Services

more products or services
Menatek Defense Technologies, Chassis
Menatek Defense Technologies, Chassis

Menatek offers many components for chassis including but not limited to control arms, drag links, steering boxes, steering links, ball joints, structural frames, roll bars, fuel tanks, etc.

Engineering Technology Corporation, SL Filament Winder
Engineering Technology Corporation, SL Filament Winder

The SL filament winding machine is ideal for large-scale applications for Aerospace, Utility, or Oil & Gas. The SL filament winder is designed specifically for larger format parts.

Level IIIA Soft Armor - (set of two)
Level IIIA Soft Armor - (set of two)

Tested To Defeat Handgun Rounds: 9mm, .357 SIG and .44 Magnum; NIJ Level IIIA Insert - Sizing 10x12; Thin and Lightweight Construction; 100% Made in the USA

Inertial Labs, Motion Reference Units (MRU) and Wave Sensors (WS)
Inertial Labs, Motion Reference Units (MRU) and Wave Sensors (WS)

The Inertial Labs team of skilled engineers provides expertise to help users select and configure from the models available: MRU-B1, MRU-B1.1, MRU-B2, MRU-E, MRU-P and MRU-PD (with subsea models available).

Laser Marking
Laser Marking

Our company is currently branding its broaching tools using the Fiber Laser Marking device.

Contract manufacturing
Contract manufacturing

Realtime has been building Space & Aerospace electronics for more than 15 years.

AAA United States: Production Realization
AAA United States: Production Realization

Transform your product goals into reality with AAA USA’s production realization services.

Inertial Labs, Weapons Orientation Modules (WOM)
Inertial Labs, Weapons Orientation Modules (WOM)

The WOM TM weapon orientation modules provides a level of performance previously unseen in the world of miniature 3DOF orientation systems.

FIXAR 025
FIXAR 025

Long-Range eVTOL for Extended Commercial Use.

Menatek Defense Technologies, NAZ Bearings
Menatek Defense Technologies, NAZ Bearings

Self-lubricating bearings under the designation “NAZ” are all-terrain products engineered specifically to show constant ultra-high performance under heavy dynamic and static loads.

JR-UAV, ScanLift Orbit
JR-UAV, ScanLift Orbit

Heavy lift Hybrid machine, designed for long endurance and vast range missions. Employed in some of the hardest environments in the world, from the snow-capped mountains in Canada to the harsh deserts of outback Australia.

Bangaree Infotech Solutions
in Media

Bangaree Infotech Solutions is India’s leading SEO Company in Ludhiana and provides the finest Digital Marketing services in Ludhiana.

Advance Die-Casting Industry Co., Ltd.

Advance Die-casting Industry Co., Ltd. is an Aluminum/Zinc Die-casting and Gravity casting maker for automotive, electronics, industrial parts and many others. We have more than 19 years of experience and know-how from Thailand and Taiwan.

Jet Cut

JET CUT has the widest range of waterjet cutting in Europe. We manage in real time your deported stock ensuring you an end-to-end traceability of your raw materials, scraps ans finished parts.

IEC INFRARED SYSTEMS LLC

IEC Infrared Systems (IEC) specializes in the design, development, and manufacture of thermal and infrared imaging surveillance systems for the defense industry.

Toyo Forging Works

Toyo Forging Works is a JISQ 9100, AS/EN 9100 equivalent, certified forge in Japan. It specializes closed die screw press forging with 7 work lines in 6,900 sq.m production floor space at 45,000 sq.m property in greater Tokyo region.

BLÜCHER GMBH

The solutions developed by Blücher are protected with over 350 patents and find use in different protective clothes of SARATOGA® for military, civil defence, fire brigades, police forces and international organisations worldwide.

Aerosion

Nous collaborons avec des secteurs aussi exigeants que l’aéronautique, le nucléaire, l’industrie et l’armement.

ASPOWER

We produce the following products; * Uninterruptible Power Supply systems, * DC Power Supplies and Rectifier systems, * Inverters, * Frequency Converters, * Voltage Stabilizers.

Download our app to your mobile phone